|
In love with these graphics. E-Man Motorsports Custom Vinyl Graphics Cindy hooked me up, She also did my registration on the front.
https://scontent.fphl2-1.fna.fbcdn.n...fd&oe=5A31489A |
Updated numbers with half tank fuel. Also learned the spring in the vacuum secondaries was not allowing the backside to open all the way, it does now!
Two guys, Mirage 25 lab'd 66.8 mph, 5200 rpm Three guys,Mirage 25 plus 66.2 mph, 5200 rpm I have to get better numbers with my regular mirage 25 I normally run. I still want to try my friend's Bravo 1 24 and hydromotive 25. https://scontent.fphl2-1.fna.fbcdn.n...ea&oe=5A1D0970 |
Bravo 1, 24 pitch, 5000rpm, 66.7mph
Cruise was 45mph @ 3500rpm https://scontent.fphl2-1.fna.fbcdn.n...ae&oe=5A39871C |
I guess you don't want it closer to 6k at WOT, so a 23 mirage might be a bit shorter than you wanna try. I also have a cleaver that came with the TRS. Not sure if 23 or 25. Once I can get back downstairs I am gonna start digging stuff out. I assembled the short block just before the knee job. Now I am stuck in bed sucking oxycodone and doing all my boating by surfing OSO...
|
To the OP.....boat looks great
darek, hoping for a speedy recovery for you! |
Originally Posted by dereknkathy
(Post 4576651)
I guess you don't want it closer to 6k at WOT, so a 23 mirage might be a bit shorter than you wanna try. I also have a cleaver that came with the TRS. Not sure if 23 or 25. Once I can get back downstairs I am gonna start digging stuff out. I assembled the short block just before the knee job. Now I am stuck in bed sucking oxycodone and doing all my boating by surfing OSO...
Originally Posted by vintage chromoly
(Post 4576684)
To the OP.....boat looks great
darek, hoping for a speedy recovery for you! |
Thank you both! And what IS the 64 coupe?
|
Originally Posted by dereknkathy
(Post 4576780)
Thank you both! And what IS the 64 coupe?
https://scontent.fphl2-2.fna.fbcdn.n...99&oe=5A1ADDC2 |
Beautiful car. Had a few. I still consider 71's late model... man how stuff used to rust back then. Bought a 67 Fairlane GT for parts. I cut 7 spot welds at the firewall and the car broke in half.
|
Originally Posted by dereknkathy
(Post 4576937)
Beautiful car. Had a few. I still consider 71's late model... man how stuff used to rust back then. Bought a 67 Fairlane GT for parts. I cut 7 spot welds at the firewall and the car broke in half.
You're in NJ, i'm not surprised the least bit lol Do you run the Delaware river at all? |
| All times are GMT -5. The time now is 10:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.