trailer for 34 powerwuest
#2
I was lookong at a PQ last spring with no trailer and the best value I found was on an aluminum. There's a company on ebay that seemed to have a pretty good deal. As you know there's pro's and con's with the aluminum. I hear a lot of people that don't like them due to the flex but I seem to see more and more at the boat ramps.
#3
E-Z loader makes a good aluminum trailler. I bought one for my 03 30' Revenge a couple years ago in New Hampshire. Think I payed around $3400. Twin I-beam tandem rated for 10,000 lbs. PQ wanted around 8k for theirs. We did have to modify the bunks for the stepped hull. Traillered to Michigan and back this year,towed great.
#4
JLS,
Integrity Trailer (Phone # 616 837-9758) is the company PQ has used to make their trailers over the years. I am not sure if they still do, but they probably still have designs. I would think trailer would be cheaper going direct. I have a 95 270 Laser on a steel Integrity trailer. Here's a picture of my boat on the trailer to give you an idea. Sorry it's not better.
They are based in Nunica, MI about 20 miles north of PQ's Holland, MI plant.
Good Luck!
Chris
Integrity Trailer (Phone # 616 837-9758) is the company PQ has used to make their trailers over the years. I am not sure if they still do, but they probably still have designs. I would think trailer would be cheaper going direct. I have a 95 270 Laser on a steel Integrity trailer. Here's a picture of my boat on the trailer to give you an idea. Sorry it's not better.
They are based in Nunica, MI about 20 miles north of PQ's Holland, MI plant.
Good Luck!
Chris
#5
When we had our Donzi, it was on a tandem aluminum trailer. I liked it a lot. It towed very nicely. No rust, of course!
The only problem was it semi-floated, kind of like bounceing off of the bottom of the ramp when we were loading. It was hitting a moving target when loading the boat!
I now have a triple axle steel and it is way heavy. Would love to have another aluminum one.
The only problem was it semi-floated, kind of like bounceing off of the bottom of the ramp when we were loading. It was hitting a moving target when loading the boat!
I now have a triple axle steel and it is way heavy. Would love to have another aluminum one.
#6
I have a 34 Powerquest with the factory Integrity Steel Trailer. The trailor looks great and has always run very well high speed or low. Best thing is how the boat loads , just get the boat close and it bunks right in. People watching can't believe a boat that large trailers so easily.
I also have a 38' PQ with the factory trailer and it also works great. I will sell you the trailor for the 34 but it comes with a boat.
I also have a 38' PQ with the factory trailer and it also works great. I will sell you the trailor for the 34 but it comes with a boat.
Thread
Thread Starter
Forum
Replies
Last Post
PurpleStuff
Trucks, Trailers and Transportation
2
06-21-2007 08:02 PM
Followmygut
Trucks, Trailers and Transportation
2
05-13-2007 10:41 PM
Gene in NC
General Boating Discussion
6
08-17-2006 09:56 PM
Poorsche
Trucks, Trailers and Transportation
2
09-13-2005 07:30 AM
boot
General Boating Discussion
4
11-22-2004 01:43 AM





