Ive actually already got alot of stereo equipment for the PQ including a Kenwood deck with the MP3 input..I may be adding the corsa exhaust so ive got the option of listening to the tunes while underway--In the OSO classifieds there is a guy selling 4 of them (2 sets) for $500 total. I sent him an email to see if he would sell me 1 set for $250.
I will check out the speaker grills--can you tell Im in a bling mode??

The drink holders should be the larger size, nice dash, I thought about redoing my dash but i'm into other boat projects at the moment.

Got that backwards there PB. The Corsa gets closed at slow speed so you can hear the radio. You should always open it before getting underway.

jus roamin, what an improvement! Nicely done!!

Here is an OT question for you guys. You know the grey raised dot plastic insets in our foot rests. You can just see the corner of one in jus roamin's pic above. Mine are starting to curl. Anyone know where PQ gets them?

Macklin, You are 100% correct under normal circumstances (corsa closed at slow speed). You would have to live in Seattle or be able to read my mind to know what I was thinking--I will be mooring the boat in Lake Union (in the heart of downtown Seattle) which is all no wake. You then have to go thru the "cut" which take you past the University of Washington--its about a 40 minute treck 1 way and all of it is no wake (puts a ton of low impact hours on your engine unfortunately) before you get out to Lake Washington where you can open it up. This is really where the corsa would benefit me. However, I received an email back from the guy who is selling the 2 sets of corsa and he is not willing to break up the 2 sets.
So, the correct drink holder size is the 3 5/8"?

The drink holders are the larger size that Eddie Marine offers, not sure on the exact cutout size, but they only sell two sizes. I bought the smaller ones first then realized I needed the bigger ones.

Macklin, I think that is called decko-dot and West marine sells it but you have to buy 3 yards at 72" wide (around $100)

I just purchased the decko-dot material and the dots that you see in the pattern are the size of a bb. Not the dime or quarter size raised dots like you have. I ordered it myself thinking it was the large pattern. I'm removing the carpet in the engine compartment and putting this stuff down. Should make for easy cleaning and more important (dry)..

I removed my carpet also, putting in polished diamond plate. I may not be able to look into the engine compartment without sun glasses but it will look cool!

Hows the glass work under the carpet??? Smooth or rough?

What a waste. I only need two pieces about 5" by 18". I think I will just pull them out, heat them up and then compress them flat over the winter, and reglue them in the spring.

It was a biotch to get off, almost like they layed it wahen the glass was still wet. It's pretty rough, I would have to do some more work if I was covering it wth rubber.