So whats the cerdict on the hull?? Does she have a hook??
I guess you didn't see my earlier post. It will probably be Spring before I do I anything. That is unless someone buys the motor from my Pachanga or the Pachanga. I'm gonna bump my thread in the swap section after the 1st of the year. If I don't don't get any responses I'm gonna have my boat guy finish the Pachanga project! Hydraulic Steering,Tabs,Exhaust! I figure if I blow buy somma these guys in a pristine 87 Pachanga doin 90 give or take someone will want it! :D After that I will do more research! I have been following the Hull Hydromatics? thread very closely! We will see!
Mentalpause
12-25-2007 10:44 AM
Originally Posted by pachanga
(Post 2382829)
I figure if I blow buy somma these guys in a pristine 87 Pachanga doin 90 give or take someone will want it! :D
Probably take some decent power to push that hull to 90. Just like the sibling Envision...they are awesome rough water boats but the hull is not very efficient.
pachanga
12-25-2007 09:55 PM
Originally Posted by Mentalpause
(Post 2383112)
Probably take some decent power to push that hull to 90. Just like the sibling Envision...they are awesome rough water boats but the hull is not very efficient.
I had a 454 Built from top to bottom for the procharger setup. It has a conservative 600HP. Probably more if I decide to let the RPM's loose. I hope I can keep the RPM's under 5500 and do what I want it to do. The setup is supposed to be good to 6000 or a bit more but I figure that will shorten the life a bit!
