PQ General Discussion
04-18-2013 | 07:31 AM
#3271
Registered
Joined: Jun 2005
Posts: 8,407
Likes: 797
From: Central IL
There was no water in the oil at all.
When i was doing the oil change in the fall thats when i noticed the crack. I did take a chunk out of the skeg on my very first outing the first year and I had it repaired and put on stainless skeg protectors.
The welding shop told me that the lower was welded on before, probably from a previous incident.
Im not sure if i should weld it up or replace the housing.
When i was doing the oil change in the fall thats when i noticed the crack. I did take a chunk out of the skeg on my very first outing the first year and I had it repaired and put on stainless skeg protectors.
The welding shop told me that the lower was welded on before, probably from a previous incident.
Im not sure if i should weld it up or replace the housing.
05-10-2013 | 07:35 PM
#3275
Registered
Joined: Oct 2011
Posts: 719
Likes: 132
From: Boyne City
Finally getting ready...I think the ice is gone...got the new sunpad on
Attachment 500389
Attachment 500389
05-12-2013 | 08:32 AM
#3277
Thread Starter
Registered
Joined: Feb 2007
Posts: 2,839
Likes: 21
From: MID MI
Well the new truck is all coming together, most in part bc of PROWRENCH, I was supposed to come help him install my lift but by the time i got there he already had it done and was alligning it!! 
Take a look if ya want!
http://www.offshoreonly.com/forums/t...ml#post3923725
Take a look if ya want!
http://www.offshoreonly.com/forums/t...ml#post3923725
