Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerquest (https://www.offshoreonly.com/forums/powerquest-49/)
-   -   whats the ride diff between 280 silencer an baja 29 outlaw (https://www.offshoreonly.com/forums/powerquest/277903-whats-ride-diff-between-280-silencer-baja-29-outlaw.html)

Griswald 06-10-2012 02:31 PM


Originally Posted by Josh LaFountain (Post 3705379)
One inch lower than stock. I have a one inch spacer on the lower. The 280 has a rep of running high slip% because the step is so big it boiles the water at the prop depth. Thats why the BBlades guys are testing that 5 blade. Its made for high X dimension hulls with steps. Thay said we will have to play with the prop depth to tune it all in. May have to go with a 2 inch spacer or possible lower the gimble. Thoes guys are the best and im confident thay will get it all it has to offer.

How far below the keel is your prop shaft? What you're saying is the the the step is so big it's boiling the water that far below the keel? I don't see how stuffing the drive farther down is going to make you go faster. Drag is drag, right?

Josh LaFountain 06-11-2012 08:50 AM


Originally Posted by Griswald (Post 3706326)
How far below the keel is your prop shaft? What you're saying is the the the step is so big it's boiling the water that far below the keel? I don't see how stuffing the drive farther down is going to make you go faster. Drag is drag, right?

I assume the point of the prop going lower in the water is to get it below the bubbles created by the step. The prop wil obviously not bite the water if its full of air. When i start running the 5 blade im going to try to take the spacer off and if i loose top end ill know i need to go deeper with the prop. Its just trial and error and hopefully some success somewhere in this testing.

Josh LaFountain 06-11-2012 08:52 AM


Originally Posted by Powerquest_Baby!! (Post 3706323)
Maybe Ive just been lucky but my 18 year old Powerquest didnt have one stress crack and neither does my 24 year old Wellcraft. Im sure alot depends on where you boat. Im mostly in lakes with 2-3 footers so the hull isnt getting pounded to death.

Wellcraft makes a great boat.

Pete280 06-11-2012 10:58 AM

IMO, the 280 was PQ's first stepped hull so they were experimenting with drive height somewhat, the prev owner of my old 280 installed a 1" spacer and picked up at least 2mph, he said it wouldblow out without the spacer. I had a basically stock 502mpi w/ gil exhaust and saw 69.5 gps, not bad for a 502

Josh LaFountain 06-11-2012 02:22 PM


Originally Posted by Pete280 (Post 3706859)
IMO, the 280 was PQ's first stepped hull so they were experimenting with drive height somewhat, the prev owner of my old 280 installed a 1" spacer and picked up at least 2mph, he said it wouldblow out without the spacer. I had a basically stock 502mpi w/ gil exhaust and saw 69.5 gps, not bad for a 502

Thats what ive heard also. Mine had a 1" spacer on it when got it. The only prob is it leans to left a bit with a spacer due to prop TQ. Bob280 told me his did it too and he took the spacer off and it didnt do it anymore. Mine also has a low water pickup " because of the air that the step creates" it needs it so it wont suck air in the cooling system.

Josh LaFountain 07-02-2012 10:06 AM


Originally Posted by verbi69 (Post 3705866)
Don't bring a knife to a gun fight.....if your not finished setting up your ride you may be in for a surprise...you just never know...

Im draggin this out of the archives. Didnt get to run any 29 OL at poker run. I did however have one fall in my lap yesterday on the river. It was perfect timing. I had 5 people in my 280. 2 full coolers and a half tank of fuel. The 29 OL runs up beside me with only 2 guys in it and throws his hand forward " we all know what that means" so he hammers down and pulls me a boat and i do the same. We ran about 2 miles and i pulled him. 5 boats. 3/4 thru the race i was 2+ boats out in front and we blew by some friends of mine tied up on the bank. Thay enjoyed the show. My fiance who is scared of speed on rough water was scrambling to get her phone to video it and almost droped it out of the boat so she didnt get any video. But i have 8 witnesses " not counting the guys in the baja"..

To finish this post id like to quoat a local baja dealer in the ohio river vally that is an ex PQ dealer "BAJA IS THE BAYLINER OF PERFORMANCE BOATS" un quoat. This didnt come out of mouth. Just passing it on from the biggest baja dealer in Louisville area.

Knot 4 Me 07-02-2012 10:33 AM

Pull the dash on a Bayliner and pull the dash on a PQ. Get back to me on which one has the better wiring. :lolhit: :evilb:

Josh LaFountain 07-02-2012 11:59 AM

Awesome. Im gonna trade my boat in for a bayliner. All you baja guys should too. Hell you might as well trade that high performance chaparral in for one too.LMFAO

Baja_man 07-04-2012 05:18 PM


Originally Posted by Josh LaFountain (Post 3721865)
But i have 8 witnesses " not counting the guys in the baja"..

And you are trying to help out the original poster with this comment?

Josh LaFountain 07-05-2012 09:06 AM


Originally Posted by Baja_man (Post 3723504)
And you are trying to help out the original poster with this comment?

Are you trying to help out the original poster with this reply?


All times are GMT -5. The time now is 11:23 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.