TOP DECK Graghics. Input.
#32
Thread Starter
Member "69" Charter #70
Joined: Oct 2000
Posts: 465
Likes: 0
From: Lake Murray, South Carolina
Hey Ray, they told me it would be 3 weeks, so being the avid boater that I am, I multiplied 3 weeks times 4(the boat service constant for time)
and came up with 12 weeks. So PQ still has a couple of weeks left for completion.
Jan
and came up with 12 weeks. So PQ still has a couple of weeks left for completion.Jan
#33
Guest
Posts: n/a
Hey Jan,
You probably haven't seen any of my posts as I usually just sit on the sidelines but I have a 1999 260 with a 502 Mag. I also sent My boat back to PQ to have gel issues taken care of and I ended up very happy with the results. I would post pictures but I don't know how. Can you tell me what they did to your boat ?
Mark fro PQ took care of me like I was a new boat purchaser. The folks at PQ also suggested the deck paint scheme and it turned our great. I am absolutely happy with my PQ as it is like new.
I am interested in improving my performance. I am running mid 60's now with the 502 and a 23 mirage plus. I have noticed that it doesn't take much to trim out to the point where the prop seems to start to loose bite. Everything is totally stock and with no mods whatsoever.
Let me know your thoughts...
Regards
NTP
You probably haven't seen any of my posts as I usually just sit on the sidelines but I have a 1999 260 with a 502 Mag. I also sent My boat back to PQ to have gel issues taken care of and I ended up very happy with the results. I would post pictures but I don't know how. Can you tell me what they did to your boat ?
Mark fro PQ took care of me like I was a new boat purchaser. The folks at PQ also suggested the deck paint scheme and it turned our great. I am absolutely happy with my PQ as it is like new.
I am interested in improving my performance. I am running mid 60's now with the 502 and a 23 mirage plus. I have noticed that it doesn't take much to trim out to the point where the prop seems to start to loose bite. Everything is totally stock and with no mods whatsoever.
Let me know your thoughts...
Regards
NTP
Last edited by New To Power; 12-10-2003 at 04:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jeff32
Trucks, Trailers and Transportation
7
08-05-2008 05:17 PM





