Bravo to # 6 conversion
#1
Registered
Thread Starter
Bravo to # 6 conversion
How much further back would the prop shaft be from the transom when switching from bravo to #6.Trying to figure x-dimension too
#3
VIP Member
VIP Member
Re: Bravo to # 6 conversion
I made the switch bravo to # 6 - 36 skater - had 12' stand off boxes - the # 6 drive, prop center is 3" further back than the bravo - Additionally we had to move the engine forward 9" to make room for the crash box. Boat weight increased 731 lbs. Make sure you raise your X dimension
#4
Registered
Thread Starter
Re: Bravo to # 6 conversion
Originally Posted by James
I made the switch bravo to # 6 - 36 skater - had 12' stand off boxes - the # 6 drive, prop center is 3" further back than the bravo - Additionally we had to move the engine forward 9" to make room for the crash box. Boat weight increased 731 lbs. Make sure you raise your X dimension