X dimension ?
#1
Charter Member #737
Charter Member
Thread Starter
X dimension ?
I am sure my X dimension is on teh high side now with out running the IMCO drive extension that I use to have on the boat. What prop should I run or should I use a spacer to lower the drive? My hdyro 4 blade just blows out and the boat will nor place out. I put on my 4 blade trophy outboard prop on the boat and it now planes out but take longer than it did before when I had the extension on the boat.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: X dimension ?
As discussed I would try a few other props prior to buying a spacer. Ultimately you may need to space the drive down but let's try some other 4 and 5 blades first.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#3
Charter Member #737
Charter Member
Thread Starter
Re: X dimension ?
Originally Posted by bbladesprops
As discussed I would try a few other props prior to buying a spacer. Ultimately you may need to space the drive down but let's try some other 4 and 5 blades first.