Prop Removal Tool
05-29-2008, 02:42 PM
#1
Registered
Thread Starter
Join Date: Jul 2005
Location: Tulsa, OK
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Prop Removal Tool
Who is the manufacturer or who sells the tool that holds the prop still while you remove the nut? It looks like a bent 2 prong fork with a handle. I thought I had seen it in magazines, but I can't find it in any back issues.
Thanks!
Thanks!
05-29-2008, 02:48 PM
#2
Registered
Join Date: May 2008
Location: Chicagoland, IL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
05-29-2008, 02:58 PM
#3
Registered
Thread Starter
Join Date: Jul 2005
Location: Tulsa, OK
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Cool! Thanks for that. Mine is difficult to get to when it is on the lift as I don't have any access to the rear of the boat. I'm hoping this will be a better solution than trying to get a piece of wood, or I use the rubber coated handle of a hammer, wedged in while trying to get the wrench going in the other hand.
Thanks!
Thanks!
Prop Stop !
05-29-2008, 05:01 PM
#5
Platinum Member
Platinum Member
