hub problem
#1
hub problem
I have bought a new pair maximus props last year and put on 15 hours on them but discovered after my second trip this year that there's a lot of room on the hub insert ,would mounting thicker plastic plates solve the problem or is there an other problem ?
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Your tolerances are on the high sides the oposite way. Wrap a 1" piece of msking tape around the insert and the strips twice and reinsert the insert. You'll be fine.
Brett
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Could be the best idea.
Call me to discuss it when you can.
Brett
Call me to discuss it when you can.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]