Powerquest prop
11-27-2010 | 10:47 AM
#1
Thread Starter
Registered
Joined: Oct 2005
Posts: 265
Likes: 11
From: Tuc,AZ
Powerquest prop
I have an 01 280 Powerquest with a procharged 454 Mag turning a 28 (non-Lab) B1 prop @ 5050 RPMs and 77 on gps. The boat is a single step hull. How would a Hydromotive Q4 work?
11-29-2010 | 11:52 AM
#2
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Your slip % is 11.53 (perfect).
The Q4 will give more stern lift. In my opinion, more than you will want on this hull. However, trying any propeller is always a good learning procedure.
Brett
The Q4 will give more stern lift. In my opinion, more than you will want on this hull. However, trying any propeller is always a good learning procedure.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
11-29-2010 | 07:44 PM
#4
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
Lab Finish a 30 Bravo 1 propeller to the correct recipe and you will pick up cruise speed and top end.
Brett
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
