Originally Posted by Knot 4 Me

OK, so an '05 should be a full single-step hull, not just the ventilated chine. I think it may also have a small notch at the transom? Cannot remember. Anyways, so you have the trim tucked somewhat at 72 MPH @ 5,200 RPM whereas when you trim it out (but not blowing out the prop, correct?) you are hard on the rev limiter at 74 MPH @ 5,500 - 5,550 RPM? Sounds to me like you can easily pull a 28p Bravo I and go from there.

Originally Posted by F-2 Speedy

is there a drive shower pickup in the cavi plate ?