dereknkathy

there is a youtube video. a guy put 3 300hp outboards on one. had it up to 90 or 100 i think.

ACrooks69

iTrader: (1)

Gull huh, too bad. When you said up north, I was hoping to see it on the Whitefish chain sitting at the Wharf or something. Where abouts in the cities are you?

BTW, that thing is awesome, and you've done some amazing metal working in the garage.

Baja Rooster

iTrader: (1)

Epic project. Keep up the good work.

airjunky

iTrader: (2)

After helping a buddy with a late model e250 5.4 triton swap here's my question.
If you have to pull the cummins out of the excursion (and you prob wont)
Does the body have to come off again?

airjunky

iTrader: (2)

Oh . Go alpha over mc, 260 888 drives ect . Beefier rams .among other things .

turbom700

No,

Pull the front core suppurt unbolt the transmission and the motor will come straight forward an up.

I have a alpha 1 gen 2 sitting at home for this project, having a 4 month old at home isnt lending me alot of time to work on it thou. hopefully this fall. For know I will just enjoy it and finsh building the LS1

ACrooks69

iTrader: (1)

Let me know if you want a hand. I'd be happy to come over and have a few beers while we tear into it. Then you can show me your handy work first hand.

JETTDOGG

iTrader: (1)

WOW-
THAT SHOWS WHAT LONG COLD WINTERS[im in maine] DO TO THE IMAGINATION. JUST ADD A COUPLE BEERS,HELPFUL NEIGHBORS AND A MASSIVE SKILL SET AND LOOK WHAT HAPPENS
VERY COOL PROJECT

turbom700

A little update.

Got a LS1, picked up some PCM manifolds, and made a big score last night. Picked up a Bravo 1 with helmet and a BBC for 2k, going to sell the BBC as it wont fit in the boat. Going to start the tear down of the boat after labor day and be back on the water in spring. Will be running a GM computer with EFI, now that my drive will support more HP I'm looking for a small supercharger for it.

sprink58

Fun times ahead !!