Wildman_grafix

I heard that, so instead we mocked like this and sent it to them (glued and screwed). Made them send the mockups back with the pipes so we knew they didn't screw up. More work but like you said if not, no way do you know you will get what you want.


The OP solved it an even better way!

scippy

iTrader: (3)

Nice fab on the pipes!.......if your capable, more boaters in this economy should go the way of Bad Chad! where dids you get the SSM 3 decals? ..or were they there previously?

nocigarette

my friend is a amazing fabricator he has made a ton of parts for me over the years, love the pvc idea. I cant stand paying anyone to do anything anymore. Customer service is a joke and you pay top dollar for ****ty work. Between my self and a couple close friends we can do just about anything in my shop.

nocigarette

the decals were made by another friend of mine. he does them on any color.

scippy

iTrader: (3)

No pressure, but Could I buy the same as yours fo my SSM 3 drives?

nocigarette

shoot me a text i will forward his contact to ya
Mike 734 363 0410

nocigarette

old dash to new. took a lot of hours ansd aluminum shavings but the new gauges,steering,switches are coming to a end.

nocigarette

Dont bust my balls they are not tight yet. some of them are not indexed yet. Waiting for help lol

TomFTM

iTrader: (3)

What cylinder heads are you using on your new motors. Those heads in your mock up have standard Chevy exhaust port heights, hopefully your heads on your new motors don’t have raised exhaust ports .

nocigarette

I beleive they are dart aluminum heads pro 1.Have to call frank at scorpion to confirm" i didnt know they had different ports unless the were tall decks.