the boat still runs low 60s, in the planning stages of some motor upgrades. but a new house has slowed the process.

Did the house thing 2 years ago. To be honest the boats much more fun!

I finally remembered to measure the prop shaft and bottom of the boat, came up with 6" difference. hope this is some info you can use. martin

Thanks I really appritiate it & yes it is info that I can use. I got to spend a couple hours on the motor today & I must say it felt pretty good.

Time for an update of the update thread :D
As some of you have figured out already my 28 Saber "No Excuses" will most likely end up with 2 XR ITS's on the back of it. & possibly twin small blocks ( but the power options are still up in the air for now ) Either way I am very thankfull & blessed that I am no longer in need of an outdrive !!
I would like to say thanks to everyone that spent their time emailing me with various drives they either had , found , or even knew of. Thanks guys
I plan on running the Pantera a bit this summer while I decide exacly on how I want to power the boat. I will be sure to keep you guys informed as to how progress is coming along. After all this forum could use a little action. :p
Here is a pic of what the rear of the Saber will most likely look like in the near future , Only in good ole fashion Yeller as we here in the south would call it . Latter guys , Scott

"Oof":eek: I saw that boat for sale and thought about doing the samething, buying it just for the running gear!!! That will be one SWEET set up when your done Scott!!! Can't wait to see it!!! Are you useing the motors out of the pantera also?? What were they again??

Not 100% sure if I am going to use the motors or not. They are 350's & they run sweet , Just not exactly sure what I want to do yet & I am keeping my options open for now. Yeah I am excited about those ITS's hanging off the back.

2 boats? I envy you. I have enough trouble with one :)

CTA

Trouble with boats whats that ? :rolleyes: ( sorry for the 2 month delay )

The Pantera is almost apart. I pulled both drives , all of the gauges , shifters , steering helm ect.. Saturday & then I pulled both motors today. So there is a little progress being made towards the Saber.

sounds like better progress than Im making. the machine shop is taking there sweet time but they are saying by the end of the week Ishould see my parts back ready for assembly. If everything goes as planned I should be seeing the lake at 70+ by first of august.