Post A Pic Of Your Scarab!
#563
Registered

Joined: Apr 2015
Posts: 570
Likes: 18
From: Deer Park,TX
[ATTACH=CONFIG]562026[/ATTACH]
Not to fill up this post I will start a new one on my rebuild. I have owned many Scarabs over the years but knew this one the day it was built but they were proud of the Kevlar composite laminate upcharge when I purchased my first Scarab Viper back in 1990.
Two years after purchasing I finished a couple months ago. Total redo down to bare fiberglass. All new heat shrinked race rigged wiring.[ATTACH=CONFIG]562030[/ATTACH][ATTACH=CONFIG]562031[/ATTACH][ATTACH=CONFIG]562032[/ATTACH]
I am very happy with the way it turned out.
Not to fill up this post I will start a new one on my rebuild. I have owned many Scarabs over the years but knew this one the day it was built but they were proud of the Kevlar composite laminate upcharge when I purchased my first Scarab Viper back in 1990.
Two years after purchasing I finished a couple months ago. Total redo down to bare fiberglass. All new heat shrinked race rigged wiring.[ATTACH=CONFIG]562030[/ATTACH][ATTACH=CONFIG]562031[/ATTACH][ATTACH=CONFIG]562032[/ATTACH]
I am very happy with the way it turned out.
#564
Yeah that's it, I use it in Bflo. It is Morgan's old one. I'd love to hear your experiences with it. I've also been trying to find pics from when Morgan owned it with no luck. I doubt it's changed much at all from when you were in it. I'll pm you my contact info.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
Last edited by bck; 11-25-2016 at 08:56 AM.





