|
As far as not being centered, you steer with your left anyways so it's centered with your left arm. Right?
|
Originally Posted by bck
(Post 4695364)
As far as not being centered, you steer with your left anyways so it's centered with your left arm. Right?
https://cimg7.ibsrv.net/gimg/www.off...42e577ee90.jpg '80 Scarab Kaama |
Good points and thanks for the photo.
|
Lots of sawing and trimming glass this afternoon. Last bits of rotten wood removed from the boat. Started cutting engine stringers. https://cimg1.ibsrv.net/gimg/www.off...a779aa54e.jpeg https://cimg0.ibsrv.net/gimg/www.off...f626e14a8.jpeg |
Fitting everything and trying to plan things out in my head. I’m leaning towards hanging my trim & tab pumps off the bulkhead. Otherwise I’ll have to put platforms back on each side. The advantage to having them on the bulkhead is they stay dry. https://cimg9.ibsrv.net/gimg/www.off...60cce3340.jpeg https://cimg0.ibsrv.net/gimg/www.off...e0de8454c.jpeg https://cimg1.ibsrv.net/gimg/www.off...26e76ad04.jpeg https://cimg2.ibsrv.net/gimg/www.off...52ae07c13.jpeg https://cimg3.ibsrv.net/gimg/www.off...41c8cd1ca.jpeg |
We stack them on the out sides of the bulkhead that way the stay dry and easy to check. Regards dan
|
After spending much time on measuring I figured out how wellcraft did it. They put the stringers in the ballpark THEN drilled the offshore mounts to make up the difference. Notice this original offshore mount almost has the holes drilled off the edge of the mount! https://cimg2.ibsrv.net/gimg/www.off...5d7aa7155.jpeg https://cimg3.ibsrv.net/gimg/www.off...68c95d854.jpeg |
Mmm... measure twice, cut once! |
Tonight more messing with the engine stringers then we spent sometime repairing some of the deck cracks. also put some of the Arneson hardware together.. https://cimg6.ibsrv.net/gimg/www.off...4554cd7da.jpeg https://cimg2.ibsrv.net/gimg/www.off...28ef3cc0e.jpeg https://cimg3.ibsrv.net/gimg/www.off...c3276e090.jpeg https://cimg4.ibsrv.net/gimg/www.off...e515e3443.jpeg https://cimg7.ibsrv.net/gimg/www.off...4f4781748.jpeg |
This thing is going to be so bad arse when done.
|
| All times are GMT -5. The time now is 06:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.