[IMG]IMG_3492.mov[/IMG]

http://www.youtube.com/watch?v=pFF3arqPpSk

Cody Cole Pachanga 22 @ 89 MPH

Friend had a 22 with a 351W would do 45. Then installed a M&W turbo kit exhausting through the prop. Instructions stat that through the prop reduces power out put by 40%. It very quietly hit 65 MPH. He then put a BBC in it still running through the prop and a bit faster. I purchased the engine with the turbo kit on it

How do we keep this post going?

I have a 87 all stock, nothing special just a enjoyable boat that down the road I may modify.

Positive Thinking
 

Well get to work throw some money at it and we'll all tell you what not to do !! These boats are a lot of fun let the spending begin !!!

I hit 77 mph with 400 SM 550 HP.. https://www.youtube.com/watch?v=lgOgT33h9xU

Love it ! when you can post it making a pass.

Anyone in here have a set of 454 Magnum Heads for one of these Pachanga 22's?? I had my 87 sold and just before it sold I found water in the oil. Couldnt sell it to someone in that condition, so now trying to figure out least expensive fix to move forward in getting rid of the boat...

If I'm not mistaken the head is a 088 square port GM head shouldn't be hard to find they show up on swap shop from time to time...

Cole - you recommend trying a Tempest?

My P22 has a 1.5 B1 drive and a mildly built 502, pushing around 475HP. It used to have 1.36's and would run 74 on GPS, but those gears blew up so I swapped in the 1.5s. I'm running a 25p Rev4 right now - it flies out of the hole and cruises about 44 at 3600rpm, but it won't trim all the way out and I can get 65 at best out of it. I'm trying to find the right 3 blade to get me back up into the 70s.