Offshoreonly.com - Search Results

Search: Posts Made By: mb_wi

Showing results 1 to 6 of 6
Search took 0.00 seconds.

Forum: General Q & A

09-24-2013, 02:37 PM

Replies: 21

Smartcraft System View Race Edition Help

Views: 9,025

Posted By mb_wi

What you are likely seeing is the trim popup. ...

What you are likely seeing is the trim popup.

In the settings, set the trim popup time to 0 seconds to disable it completely, and see if the problem goes away.

If you still want to use the trim...

Forum: General Q & A

02-16-2007, 08:01 AM

Replies: 47

496HO need help, serious problem

Views: 12,626

Posted By mb_wi

The fuel pressure across the tip of the fuel...

The fuel pressure across the tip of the fuel injector (fuel pressure delta) is what the fuel pressure regulator is trying to regulate, and this pressure (approx 40 psi for 8.1L) should remain...

Forum: General Q & A

08-31-2006, 06:24 PM

Replies: 12

496 Engine malfunction warning due to sensors not connected?

Views: 4,439

Posted By mb_wi

Re: 496 Engine malfunction warning due to sensors not connected?

The faults are for optional sensors that may or may be hooked to the engine that are used for the rest of the boat. If you do not have them installed, they will set a fault as soon as you clear them...

Forum: General Q & A

08-11-2006, 12:48 PM

Replies: 10

525 EFI help

Views: 11,359

Posted By mb_wi

Re: 525 EFI help

Is this a 10 pin 525 or a 14 pin 525 (engine harness connector)?
Does the erratic operation of the gauges follow the engine misfire?
Be sure to check that all of the plug wires are installed...

Forum: General Q & A

07-18-2006, 08:09 AM

Replies: 4

496 Mag SmartCraft Oil Temp Reading

Views: 5,983

Posted By mb_wi

Re: 496 Mag SmartCraft Oil Temp Reading

The 496 does not have an oil temp sender available for input into Smartcraft. The 32 degrees is showing up because 0 deg. C is being sent to the gauges, and being converted to 32 deg F. You can...

Forum: Formula

05-17-2005, 10:19 AM

Replies: 1

Smartcraft SC5000 Install on 370SS

Views: 2,927

Posted By mb_wi

Re: Smartcraft SC5000 Install on 370SS

You need to set the port engine location to port. It seems like it is set to starboard. that is why port engine also shows data for starboard. You should be able to set the engine location with the...

Showing results 1 to 6 of 6