1993 XR6 idle stabilization/Lync and sync question
03-03-2021 | 07:57 PM
#1
Thread Starter
Gold Member
Joined: Jun 2006
Posts: 5,117
Likes: 959
From: Seaford, VA
1993 XR6 idle stabilization/Lync and sync question
1993 XR6 on my 16 Donzi
Posted this on S&F but figured I'd cross post here....
I have followed manual to the T on the Lync and sync and want to confirm that If I've disconnected the white/black wire coming out of the idle stabilizer at the connector (which is after the switch boxes) have I truly disabled the idle stabilization feature?
I guess the reason I ask is with the wire unplugged or plugged in I get the same idle timing reading at cranking speed. Does the box advance timing at cranking speed or does the motor need to be running?
Thanks
Eric
Posted this on S&F but figured I'd cross post here....
I have followed manual to the T on the Lync and sync and want to confirm that If I've disconnected the white/black wire coming out of the idle stabilizer at the connector (which is after the switch boxes) have I truly disabled the idle stabilization feature?
I guess the reason I ask is with the wire unplugged or plugged in I get the same idle timing reading at cranking speed. Does the box advance timing at cranking speed or does the motor need to be running?
Thanks
Eric
