Looks Great I forgot to tell you. Best of luck.

Looks Awesome!

Absolutely, the best thread ever, but maybe 703's next :eek: guys see turbine 101 too ! :ernaehrung004:

We have been toying with idea.:cool:

Ya must have had to wipe the dust off this one!


I kinda liked it all white.:eek:
I gotta admit nothing sounds like a PSI Blower Motor
riding on the chip.

You have done a great job...I't is refreashing to see someone bringing a project back to life.

ya do-in a last fall run ? also ck.out add#25773 OSO classifieds ck.the tilt trl. under misc. cats :cool:


www.youtube.com/watch?v=B6-BuvVj8AY

Bump

BAck tO LIfe

I wont even look back at these pages.

557 cu inch
PSI 206b,s
Dart CFE Big Chiefs
Sonny Bryant billet
Carrilo rods
Ross Racing pistons coated
Steel tapered wrist pins
10 thousands bore clearence YES Thats right
3.5 on the mains 3.0 on the rods
10 in the hole
94 to 97 cc heads
Titanium Intakes
Iconnel exhausts
Wet sump 14 quart oil pans
Lee intercoolers with cupranichel cores
12lbs boost
Timing 30 degrees locked yes 30
8.5 static compression
Commetic head gaskets
RAD 9985 Isky tool room springs
Crower severe duty solid rollers with high pressure oiling
T&D Shaft rockers
Cam r254/420-2s1 ground on 114
254/262 at .50

Machined by Nat chevertone
assembled by me.
Bothered the hell out of Dean Gellner!

Ran like a champ Expected life 30 hours.

New TURBINES Expected life 3000 hours:drink:

Well I did read every page. All that talk about pistons then BOOM seven months later you've got turbines. What happened, why did you all of a sudden rip the piston motors out and put the turbines in??

Don't get me wrong...I KNOW you made the right decision...but you could have sent the boat to Turbine Marine in the beginning and saved a LOT of trouble. I know Arruda's not cheap, but he is arguably the best turbine man in the business. He has reconfigured almost every system of the Lycoming for Marine use. Just one question Gerry; are the starters on top or the bottom of the engines?