My new 2007 30 SKater
07-07-2008 | 05:13 PM
#281
Offshoreonly Advertiser
Joined: Oct 2002
Posts: 1,365
Likes: 34
From: De.
Frank, Are you going to try the six blades?
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
07-07-2008 | 07:19 PM
#282
Thread Starter
Gold Member
Joined: Oct 2000
Posts: 2,116
Likes: 1
From: Port Charlotte, FL
Not sure yet.
First I have to work out my guardian mode issue (water temp/pres), and then run the 5 blades past 96.3 mph. Once I have WOT data, I can work with Matt & Julie to see what direction the data indicates, we should go in.
First I have to work out my guardian mode issue (water temp/pres), and then run the 5 blades past 96.3 mph. Once I have WOT data, I can work with Matt & Julie to see what direction the data indicates, we should go in.
07-09-2008 | 08:47 AM
#283
Allergic to Nonsense
Joined: Aug 2001
Posts: 5,007
Likes: 21
From: Granite Quarry, NC
6 Blades!!!!!!!!!!
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?
) to get a level set.
Thanks for the data.....
T2x
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?
) to get a level set.Thanks for the data.....
T2x
07-09-2008 | 09:23 AM
#284
Thread Starter
Gold Member
Joined: Oct 2000
Posts: 2,116
Likes: 1
From: Port Charlotte, FL
6 Blades!!!!!!!!!!
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?) to get a level set.
Thanks for the data.....
T2x
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?
) to get a level set.Thanks for the data.....
T2x
They have been great to work with.
07-09-2008 | 01:25 PM
#285
Offshoreonly Advertiser
Joined: Oct 2002
Posts: 1,365
Likes: 34
From: De.
T2X, do you have a 30 Skater with 300xs also?
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
07-15-2008 | 11:10 PM
#288
Registered
Joined: Jun 2006
Posts: 2,057
Likes: 0
6 Blades!!!!!!!!!!
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?) to get a level set.
Thanks for the data.....
T2x
Let's get the 5's dialed in first
I also have a set of Throttle Up 5 blades, and Julie and Matt have been great to work with.
We have a very high performance bar, so it will take some dialing in with the 5's (and 6's ?
) to get a level set.Thanks for the data.....
T2x
12-19-2008 | 12:09 PM
#290
Registered
Joined: Nov 2003
Posts: 2,503
Likes: 149
From: Cape Coral, FL
What props are you currently running on your skater? Have you done anymore testing?
I am trying to figure out what direction I should go with props for my motion.
Thanks!
Don
