PokerFace23

hey menace is your real name dennis?

JIMKID Motorsports

got home today to 14 inches of the white stuff cold to had to go and plow the drive way come on summer

KNOT-RIGHT

Shop...........Hmmm.
The Tub dont fit in it. Its to Wide in the Can

I figure the boat was born in Michigan it can handle
a little snow.

RunninHotRacing163.1

Hey Bro it was born in Mich in a 70 degree delivery room and the doctors run around in shorts and short sleeve shirts like its friggin florida . Last bunch of pics L@@kin great need more pics but u can keep the snow by you guys ,sounds like you got more snow coming from Mich all the way to Maine
ROCK ON its a SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

1CE

GGerry, dude it loooks cold/but today the Jan thaw was here/hope you where able to get some work done on the ol'beast/by the way what's up w/the now hiring sign in the back ground of your pic J ps what route is your dealer-"ship" on ?

RunninHotRacing163.1

Gerry need more pics without the SNO !

KNOT-RIGHT

I have made good progress as you know it was 65 yesturday.

Mechanicaly fastened
This was a nightmare. (Cut and welded more then I wanted to.)

Driveshafts are in.
All wired up.

In a nutshell this is easier then rigging pistons.

This was alot of fun. The beer consumption was alot higher.
http://www.offshoreonly.com/forums/s...ghlight=skater

KNOT-RIGHT

I know I am a hack.... I promise to go and detail all the
wiring and clean everything for all you attention to detail
freaks.


ICE the sighn you asked about was the guys next door at the tranny shop bustin my balls about getting a Job.
They said all I do is work on my boat.

I told them I got my freakin prioritys straight!

KNOT-RIGHT

Here is starboard.

Alternator and powersteering just fit.

KNOT-RIGHT

Wow If you were refering to the back bolts they were
a PITA.


I just ordered the pyrometers 0-1600.

Ed Manions sending me some Torque Meters also.
They are a mechanical presure gauge that reads 0-100psi
pictured below is the actual graph provided by PPS from the port engine.