Turbine 101
01-11-2008, 10:50 AM
#301
Registered
Thread Starter
Going to tig weld that crack today.
These are dry exaust Stainless steel.
They have the typical headerwrap.
They also have a fire containment blankets.
These are dry exaust Stainless steel.
They have the typical headerwrap.
They also have a fire containment blankets.
01-11-2008, 10:55 AM
#302
Registered
Thread Starter
I am guessing The catch can catches maybe rain water.
Any ideas anyone?
It has hose fittings on them -4 maybe
Notice the end where they clamp to the combuster housing it
is not rigid. Springs to absorb vibrations and misalighnment.
Any ideas anyone?
It has hose fittings on them -4 maybe
Notice the end where they clamp to the combuster housing it
is not rigid. Springs to absorb vibrations and misalighnment.
01-11-2008, 11:40 AM
#303
PF Marine
Platinum Member
Looks like you are making lot's of heading on the project. I look forward to seeing it finished.
01-11-2008, 04:21 PM
#304
Registered
Thread Starter
Its got a zoom so ya can keep a safe distance.
Well here is the exhaust pretty much ready for installation.
I freakin Buff the Sh1t out of these chrome stacks.
I only had like one piece of thread hanging from the buff pad
when I was finished.
01-12-2008, 01:20 AM
#305
PF Marine
Platinum Member
C,mon over man.... you can hold the camera
Its got a zoom so ya can keep a safe distance.
Well here is the exhaust pretty much ready for installation.
I freakin Buff the Sh1t out of these chrome stacks.
I only had like one piece of thread hanging from the buff pad
when I was finished.
Its got a zoom so ya can keep a safe distance.
Well here is the exhaust pretty much ready for installation.
I freakin Buff the Sh1t out of these chrome stacks.
I only had like one piece of thread hanging from the buff pad
when I was finished.
01-12-2008, 01:21 AM
#306
PF Marine
Platinum Member
C,mon over man.... you can hold the camera
Its got a zoom so ya can keep a safe distance.
Well here is the exhaust pretty much ready for installation.
I freakin Buff the Sh1t out of these chrome stacks.
I only had like one piece of thread hanging from the buff pad
when I was finished.
Its got a zoom so ya can keep a safe distance.
Well here is the exhaust pretty much ready for installation.
I freakin Buff the Sh1t out of these chrome stacks.
I only had like one piece of thread hanging from the buff pad
when I was finished.
01-12-2008, 05:10 PM
#307
Registered
Thread Starter
Heres what we did today.
Nothing lined up correctly.
Have to tweak the mounts.
Both exhausts are in yeah!
Tomorows another day.
We all need a freakin drink
Nothing lined up correctly.
Have to tweak the mounts.
Both exhausts are in yeah!
Tomorows another day.
We all need a freakin drink
01-12-2008, 06:10 PM
#308
Registered
Join Date: Oct 2006
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
G, those catch trays guttta be 4-rain or condensation. Is there a hole or exit port in the actual exhaust pipe to drain into the mini gutters? Man, I have to see it with my own eyes, maybe by say 11:30 am Sunday - will call 1st as instructed. - u-crazy - me too ! 
Last edited by 1CE; 01-12-2008 at 11:38 PM.
01-13-2008, 07:00 PM
#309
Registered
Join Date: Jan 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
This man is not right. He is very very sick in the head and needs help immediately. If you see this man, that him to the nearest mental hospital and have him comitted.
Your Sick Gerr-Bob... just plain sick
01-13-2008, 08:30 PM
#310
Registered
Thread Starter
Thanks for ur help Today. I could have not got that one mount
completed without Yourself And Jays help
Who knows if ya continue hanging with us boat geeks You
may be in danger of becomming one
If ya stop by in tommaros blizard and the Plow truck is
there and I,m no where to be found peak in the old
exhaust holes from the piston engines I will be in there
with a blow dryer in my pants.
There comming to take me away. Ha Ha!!
