Skater vs MTI
01-12-2013 | 01:00 PM
#143
Gold Member
Joined: Jan 2007
Posts: 1,039
Likes: 0
From: Tulsa, OK
That's in a 1 mile drag, 1.1 gears turning a set of 38's well under 6k rpm's.Top speed is still unknown at this point I think. My guess he will be flirting with the 200mph without a doubt. That boat has a lot of cool factor with those beautiful Smith Power twin turbos in the bilge.
01-13-2013 | 10:14 PM
#144
VIP Member
Joined: Jan 2004
Posts: 2,530
Likes: 5
From: Sherman, Texas
388ss
That's in a 1 mile drag, 1.1 gears turning a set of 38's well under 6k rpm's.Top speed is still unknown at this point I think. My guess he will be flirting with the 200mph without a doubt. That boat has a lot of cool factor with those beautiful Smith Power twin turbos in the bilge.
01-17-2013 | 01:13 AM
#145
Registered
Joined: Jan 2008
Posts: 292
Likes: 0
From: Yorba Linda, CA
01-17-2013 | 09:37 AM
#146
VIP Member
Joined: Jan 2004
Posts: 2,530
Likes: 5
From: Sherman, Texas
06-16-2013 | 10:47 AM
#149
VIP Member
Joined: Feb 2003
Posts: 18,696
Likes: 200
From: North Carolina
great thread.
06-16-2013 | 06:26 PM
#150
Banned
Joined: Apr 2013
Posts: 26
Likes: 0
Not even close, the mti 36 is 34' running surface, the 40 skater is a true 40' running surface. 6' is huge, not much that runs better in rough water than a 40 skater
