Mobile1 28 Skater
#101
Platinum Member
Platinum Member
Well it took over two years, but the new "blank slate" mobile one skater is done with its glass and gelcoat work....Sitting on a new aluminum trailer. I will say it was worth the wait, cause its beautiful. Hopefully the rigging won't take another two. Lol
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#102
Registered
iTrader: (1)
Well it took over two years, but the new "blank slate" mobile one skater is done with its glass and gelcoat work....Sitting on a new aluminum trailer. I will say it was worth the wait, cause its beautiful. Hopefully the rigging won't take another two. Lol
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Looks like there could be 2 28' projects this winter
#106
Registered
did this boat have k planes on it when was raced?
saw on an earlier page a pic of the dash with a 4 slot trim indicator,,,,,,
I believe ""cat can do "" boat had them didn't know mobil 1 did also,,,,
I have a 28 im going through
and gutting parts off my Excalibur to put in skater,,,all new gauges,switchplates,control;s,gps,radio ect
and have a new set of 12"x24" long tapered tabs I was thinking on putting on for for the mid speed porpous
saw on an earlier page a pic of the dash with a 4 slot trim indicator,,,,,,
I believe ""cat can do "" boat had them didn't know mobil 1 did also,,,,
I have a 28 im going through
and gutting parts off my Excalibur to put in skater,,,all new gauges,switchplates,control;s,gps,radio ect
and have a new set of 12"x24" long tapered tabs I was thinking on putting on for for the mid speed porpous
#108
Registered
huge tks for this pic,,,,,
don't know where u always are getting all these pics,,,,
but as some 1 else said don't stop,,,,,,,,,,
larry,,,,,do u still have then tabs u took off
don't know where u always are getting all these pics,,,,
but as some 1 else said don't stop,,,,,,,,,,
larry,,,,,do u still have then tabs u took off
#109
Registered
Thread Starter
Join Date: Feb 2012
Location: Antioch, IL
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Yes I still have them. They are not your average K Planes. They are composit with carbon fiber inserts. I've never seen any other like it. Maybe Double Rigged could tell you more about them. I had to cut the trim tab indicator lines in order to remove them. I have the rams and pumps for it also, not sure on the through hull fittings, i may. They all could you a good cleaning. I can get some pictures this weekend....
On a separate note, those of you mentioned Paul's motors. Do you guys have any pictures of the Nordic they came off of? I'd like to see the paint scheme......
Larry
On a separate note, those of you mentioned Paul's motors. Do you guys have any pictures of the Nordic they came off of? I'd like to see the paint scheme......
Larry
#110
Platinum Member
Platinum Member
Yes I still have them. They are not your average K Planes. They are composit with carbon fiber inserts. I've never seen any other like it. Maybe Double Rigged could tell you more about them. I had to cut the trim tab indicator lines in order to remove them. I have the rams and pumps for it also, not sure on the through hull fittings, i may. They all could you a good cleaning. I can get some pictures this weekend....
On a separate note, those of you mentioned Paul's motors. Do you guys have any pictures of the Nordic they came off of? I'd like to see the paint scheme......
Larry
On a separate note, those of you mentioned Paul's motors. Do you guys have any pictures of the Nordic they came off of? I'd like to see the paint scheme......
Larry
[ATTACH=CONFIG]564830[/ATTACH]
Get a hold of Scott or Steve, they are good friends of Paul ... http://www.performanceboats.com/outboard-church/
Last edited by Nice Pair; 05-31-2017 at 06:09 PM.