New 2009 32' Spectre Completed
#61
Thread Starter
Registered

Joined: May 2007
Posts: 100
Likes: 0
From: New Orleans, LA
Mike
We are running 15X32 3-Blade non-labed but on the rev-limiter. Sent them to Brett to get off the limeter but havent had a chance to run them yet. If you getting the new XS go with the 15X34 and let Brett work them. That's what I am planning on doing after talking to Brett.
It looks like we are going to Lake Havasu next month 4/22/10 for the Desert Storm poker run. I hope more SPECTRES can come to the run next month. Tony is sending his 36 and Jay will be there also. I am also running in the Royal Purple Poker Run May 1, 2010 in Lake Pontchartrain.
Thanks,
Tommy
We are running 15X32 3-Blade non-labed but on the rev-limiter. Sent them to Brett to get off the limeter but havent had a chance to run them yet. If you getting the new XS go with the 15X34 and let Brett work them. That's what I am planning on doing after talking to Brett.

It looks like we are going to Lake Havasu next month 4/22/10 for the Desert Storm poker run. I hope more SPECTRES can come to the run next month. Tony is sending his 36 and Jay will be there also. I am also running in the Royal Purple Poker Run May 1, 2010 in Lake Pontchartrain.
Thanks,
Tommy

Last edited by TB Racing; 03-25-2010 at 10:11 AM.
#62
Beautiful boat, TB have you had any gearcase problems yet. Our son has a 28 Skater, with twin 300's on it. He ran 15X34 3 blade Mercury cleavers on it. The gear cases constantly had water in them from the vibration and harmonics that the 3 blade props have. They are fast, but very hard on gearcases if you are surfacing them. Had Brett do a pair of 4 blades, what a difference. Smoother, blistering mid-range acceleration, better rough water handling, lost about 3 mph on the top end, but gained everywere else. The best part, the gear cases dont have any more problems. This is on a boat that was running 75 hrs a year.
#63
Here are some pictures of the 2010 Boat show.
http://www.tbenterprises.net/assets/...t_Show_001.jpg
http://www.tbenterprises.net/assets/...t_Show_004.jpg
http://www.tbenterprises.net/assets/...t_Show_007.jpg
http://www.tbenterprises.net/assets/...t_Show_002.jpg
http://www.tbenterprises.net/assets/...t_Show_006.jpg
http://www.tbenterprises.net/assets/...t_Show_001.jpg
http://www.tbenterprises.net/assets/...t_Show_004.jpg
http://www.tbenterprises.net/assets/...t_Show_007.jpg
http://www.tbenterprises.net/assets/...t_Show_002.jpg
http://www.tbenterprises.net/assets/...t_Show_006.jpg
#64
Thread Starter
Registered

Joined: May 2007
Posts: 100
Likes: 0
From: New Orleans, LA
Beautiful boat, TB have you had any gearcase problems yet. Our son has a 28 Skater, with twin 300's on it. He ran 15X34 3 blade Mercury cleavers on it. The gear cases constantly had water in them from the vibration and harmonics that the 3 blade props have. They are fast, but very hard on gearcases if you are surfacing them. Had Brett do a pair of 4 blades, what a difference. Smoother, blistering mid-range acceleration, better rough water handling, lost about 3 mph on the top end, but gained everywere else. The best part, the gear cases dont have any more problems. This is on a boat that was running 75 hrs a year.
#69
Thread Starter
Registered

Joined: May 2007
Posts: 100
Likes: 0
From: New Orleans, LA
#70
Registered
Joined: Aug 2006
Posts: 350
Likes: 0
From: Casa De Kappy
I have been following this thread for awhile I also want to see what this boat will do with the right prop.
The photo of the GPS is required
otherwise you get a lot of this and that a posted photo of the GPS calms the natives and makes believers or turns you into a convert asap.I'm hoping to be a convert here real quick
.KAP
P.S. See you in Havasu Tommy B. it will be a worthwhile endeavor.




