Sweet !!!!!!

I love these 30 CC's !!!!!

Ok, survey time, wanted peoples opinion on something....

Trying to figure out whether I want to put the steering wheel on the left side of the console, and throttle right handed, or on the right side of the console, and throttle left handed.

Upside to going steering wheel on the right is that the section on that side were you would mount gauges is wider...but then you are throttling left handed. If I go steering wheel on the left, then I am throttling right handed, but may have to move some gauges around as I am also doing a mercury racing vessel view system. Any feedback appreciated, I attached a picture from a 21' millenium and my actual console for reference

Right side. A lot of people i've spoken to who've done the switch to throttling lefty say its not bad. You're also not doing serious offshore running so aggressive throttling won't be a common issue.:drink:

I like the wheel on the left, and throttling with my right hand

Ditto.

Wheel - Left

Throttle - with the Right hand.


The boat is looking awesome. Will you have cushions on the seats with "Superboat" embroidery? ....noli

Yea, I am leaning that way, not only because thats been most of my experience, but also because my right shoulder is all screwed up, and being able to keep that hand lower on a throttle as opposed to higher on a wheel is more comfortable

Anyone got any thoughts on actually throttle set up? Throttles together on inside with shifters together on outside, or go shifter, throttle, throttle, shifter?

.......

Sean, looking good. You should be a happy man :)

Your hull has been in the mold a long time. I think that the longer it's in the mold to cure, the better.

When do you think George will have her?





noli

Your second choice sounds good.

S-T-T-S

Thanks Noli-I am hoping mid Feb

saw the boat outta the mold today and it looks great.....

sean and i are gonna have a little brainstorming session tomorrow on setting up the console....

sean do the throttles in this set up S-T-T-S.......its just weird any other way.....

Me, Rick, George and JC at the factory at one time....thats a real motley crew!

Had a nice brainstorming session at the shop today. Sean was finally able to see his new baby. The proud new daddy. ;)

Several things.....

#1- Boat looks great!!! Rick has done an amazing job, his workmanship is top notch! This is why I went with Superboat, for the moment today, when I was able to see 3 months of work really come together and know I have watched my boat get built from scratch

#2- I have enough LED interior lights to light up Manhattan, this boat is gonna glow in the dark, love it!

#3- By 'brainstorming session', Rick means George, JC, me and him talked about rigging the center console for ten minutes, and then told stories about boating, stupid things guys do boating,.s....good times!

#4- George had some great ideas on lay out for the console, only reinforces what I already new....boys at Accurate are going to do a great job.

Decesions on the console rigging were:
#1- Steering wheel on the left, throttle right handed
#2- Shifter will go S-T-T-S
#3- Vessel view will go in the panel in front of steering wheel, GPS will go in the panel to the right, then next to the gps, we will do five gauges with angle bezels facing the steering wheel, two psi, two water temp, one fuel gauge
#4- 3 batteries, two cranking, one house, and trim pumps will be mounted inside the console, as opposed to in the back.
#5- Will be doing a blue/white upholstery. Really want a Superboat emblem stitched into the back seat, but JC says he hasnt had much look with them

Overall, it is really looking great and according to Rick and JC, this week will really pull the boat together. Deck will be popped out, attached to the hull, etc. By the end of the week, it will really look like a true vessel!

Now....need to decide on a name:)

great time this morning.....glad we got a few questions answered and great to hang with JC , Sean and rick....

George- good to see you, plan for that first weekend in April to start off at Frank and Dicks and then move over to Kismet in the new vessel........JC said he will take care of the tab:evilb::party-smiley-004:

NICCCEEEEE>>>>>>:evilb::evilb::evilb:

Some more shots- sides have been gel coated, and the other pic shows a speaker mounting we are doing under the deck

Today should be a good day, going to try to get the deck popped loose amd maybe out of the mold.

......deck being popped from the mold

JC at work.........

...........

Great shots !!!! You must be all AMPED UP Sean !!!

More then I can even explain, feel like everything is just coming together now...lieterally!

Guys from Accurate are ordering some parts as we speak, including throttle so JC and the guys can build a throttle mount for the console.

I am gonna swing by the shop on Friday and take some shots

Gary- we need to get you up to LI this summer for some drinks at Kismet

Some more pics, all the deck hardware installed.......

Sounds like a plan, we spent many days and nights at Fire Island with John and Rick. I thought John liked Cherry Grove much more than Kismet !!! lol lol !!!!!!!!:drink::drink::drink:

Definate4ly had a great day as far as production goes. Worked late to get things ready for the morning. Deck will be going on the hull.
Gary, don't you have a pic of JC and Marilyn Monroe floating around ? ;)

Rick- my little guy is going to love the push button cleats....thats hours of keeping him occupied

W:eek:W! Nice hardware!

Rick, JC and Marilyn, AHHHHHHHHHHH The good old days in Cherry Grove !!!! Did She ??? ever move in in with JC.:eek:

Sean, found the Cargo nets to hold down the bumpers in the front storage area.. They are 11" X 30". I have to double check the dimensions when I get into the shop. the pictures in the link are for illistrations, not of the actual net. Damn, these things are pricey... $ 18.95 each. Alot cheaper then I thought. I'm running late, slept through the alarm. Good ol Tylenol PM's ;)

http://www.cargogear.com/OneItemInfo...tnum=HISIDENET

Nice, thanks for looking, will be in tomorrow

.........

......

......

......

Today I'll be bolting the deck to the hull and hopefully getting some bumprail on.

Swung by the shop today and boat is looking great, hope to have some pics up tonight

Also picked up the trailer, Neil at East Coast in Bayshore is a great guy to deal with if you need some new wheels for your ride

Kicked butt today. Deck is bolted to the hull and the stainless bumprail is on. Looking awesome

......