Starting My Y2K Winter Upgrades !
08-20-2013 | 11:47 PM
#34
Thread Starter
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
Still haven't ran it yet . Had to make custom wing plate to compensate for how close the rams were mounted on the Box . I should finish up all the welding tomorrow and decide weather I'm gonna powdercoat it or leave it raw . I'm gonna be running a temporary drive for a couple of weeks then buying XR sportmaster from one of my best friends . There's an SCX in some ware in my future ....................[ATTACH=CONFIG]506681[/ATTACH]....[ATTACH=CONFIG]506682[/ATTACH]....[ATTACH=CONFIG]506683[/ATTACH]
Last edited by OCCJoe; 08-20-2013 at 11:54 PM.
08-29-2013 | 12:19 AM
#35
Thread Starter
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
Just came in after dodging rain drops for three hours . And before any body bashes me for adding a 17" monitor in my dash it has a direct link tied into my GPS and I'm mounting a night vision camera on the boat . And it plays kick a$s videos too ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!![ATTACH=CONFIG]507139[/ATTACH].........[ATTACH=CONFIG]507137[/ATTACH].........[ATTACH=CONFIG]507138[/ATTACH]
Last edited by OCCJoe; 08-29-2013 at 12:24 AM.
09-11-2013 | 11:24 PM
#37
Thread Starter
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
Very limited use this year , Check out the guy on the ski just before he busted his a$s............................................... .......................... [ATTACH=CONFIG]507783[/ATTACH].....[ATTACH=CONFIG]507784[/ATTACH].....[ATTACH=CONFIG]507785[/ATTACH]
09-14-2013 | 12:01 AM
#39
Thread Starter
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
.................................................. ............(((((((((Keep the theme going)))))))) .................................................. ......................[ATTACH=CONFIG]507952[/ATTACH]..................[ATTACH=CONFIG]507953[/ATTACH]..............[ATTACH=CONFIG]507954[/ATTACH]..................[ATTACH=CONFIG]507955[/ATTACH]
Last edited by OCCJoe; 09-14-2013 at 12:05 AM.
09-15-2013 | 11:18 PM
#40
Thread Starter
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
After I put the monitor in the dash I had to move the head unit into the cabin so I relocated the sub box added 3" of surface and wrapped it in Bi-axel carbon fiber . Box took all of saturday to build . If I had it to do all over again I don't know if I would . Lot of work for a very little reward that only myself and a few friends will ever see . Picture is of starboard side that I still have to do and the Port that is done .......[ATTACH=CONFIG]508051[/ATTACH].....[ATTACH=CONFIG]508052[/ATTACH].....[ATTACH=CONFIG]508053[/ATTACH].....[ATTACH=CONFIG]508054[/ATTACH].....[ATTACH=CONFIG]508055[/ATTACH].....[ATTACH=CONFIG]508056[/ATTACH]
