![]() |
Pat, thanks for the info. I never heard of a Bravo XR " Racing Drive ".
|
Originally Posted by Superbabi
(Post 2603739)
Pat, thanks for the info. I never heard of a Bravo XR " Racing Drive ".
I was just giving an example of what can be had on the used market. I kow that you can get "new" in the box, left over XR drives for around 6K. You and I talked about this before you bought the big engine and you know my opinion. You can have 2 XR drives on the self for the price of some other drives... |
sorry about the drive Gary. I keep waiting for some one to try the SCX. that's the one I am considering. Saw one the other day and it was quite impressive.
|
Originally Posted by tomcei
(Post 2604166)
sorry about the drive Gary. I keep waiting for some one to try the SCX. that's the one I am considering. Saw one the other day and it was quite impressive.
|
Are you sure there is no stated war? I think they(imco) rate the scx fairly high don't they, like 750-800 on torque
Somebody help me out here. Gary, what ever you do good luck. I look forward to following the thread. Tom |
Will be interesting to see if the imco scx can hold up to 800 or so hp,would be the easiest way to go,all the other style bravos will probably be short lived behind 800,need to be easy on the throttles and keep full throttle speed runs to a mininum.Awesome looking engine,love the ke intake set up.I set up 2 boats with Konrad ace this winter,38 powerplay 800hp.and a 29 fountain900hp,at this time i think this is the best set up out there for this hp range,time will tell.
|
The Imco is a great setup. We have sold one Ace and its been blown to bits several times, granted over the HP rating (900 + on a single 32). Overall Imco seems to come out on top for us.
|
well the ace(konrad) is a trans set up correct?
I know that imco has the SCT which uses a trans as well and slightly higher in pwr rating over its brother the SCX |
Originally Posted by tomcei
(Post 2604215)
Are you sure there is no stated war? I think they(imco) rate the scx fairly high don't they, like 750-800 on torque
Somebody help me out here. Gary, what ever you do good luck. I look forward to following the thread. Tom |
Originally Posted by MDGperformance
(Post 2604219)
Awesome looking engine,love the ke intake set up..
|
| All times are GMT -5. The time now is 04:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.