26 baja 468 bravo part out
01-14-2013, 11:46 AM
#11
01-14-2013, 11:49 AM
#12
1987 Baja 265 sport. Has a 468 50 hours on it. Gimbal bought brand new in 05 with 50 hours. Bravo drive 24p bravo 1 prop.
Motor is a 468 comp cam pro roller rockers 10qts oil pan holley carb dart iorn eagle heads gil/harden manifolds and risers pro billet msd dist. and soft touch rev limiter valve covers a bit rough, i will pull them and powder coat if wanted to color of choice. Ran the boat right around 70 never dyno'd but guestimate of 475 or so. Couple was also new with 50 hours. Steel trailer load rite with title brake inop but set up for it. has alloy wheels new tires bearing and seals just done.
Motor is a 468 comp cam pro roller rockers 10qts oil pan holley carb dart iorn eagle heads gil/harden manifolds and risers pro billet msd dist. and soft touch rev limiter valve covers a bit rough, i will pull them and powder coat if wanted to color of choice. Ran the boat right around 70 never dyno'd but guestimate of 475 or so. Couple was also new with 50 hours. Steel trailer load rite with title brake inop but set up for it. has alloy wheels new tires bearing and seals just done.
With all due respect, I cannot see a Force 265 hull seeing anywhere near 70 with only 475 HP. Friend of mine has an 89 Force 235 with around 525 HP (HP500 Clone punched out to 509) and he is only seeing about 72 GPS.
01-14-2013, 12:45 PM
#14
Registered
iTrader: (2)
Stinger, wish you were closer to me and I would take a look. Could just swap my 489 right into it. With all due respect, I cannot see a Force 265 hull seeing anywhere near 70 with only 475 HP. Friend of mine has an 89 Force 235 with around 525 HP (HP500 Clone punched out to 509) and he is only seeing about 72 GPS.
With all due respect, I cannot see a Force 265 hull seeing anywhere near 70 with only 475 HP. Friend of mine has an 89 Force 235 with around 525 HP (HP500 Clone punched out to 509) and he is only seeing about 72 GPS.
01-14-2013, 07:03 PM
#15
Gold Member
Gold Member
iTrader: (1)
Join Date: Sep 2010
Location: LSC, MI
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Is your price of $800.00 for the whole transom assembly or for just the gimble ring? I just need a new gimble ring and I understand if you want to sell the whole assembly and not just the ring.
