26 baja 468 bravo part out
01-13-2013 | 02:25 PM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
26 baja 468 bravo part out
1987 Baja 265 sport. Has a 468 50 hours on it. Gimbal bought brand new in 05 with 50 hours. Bravo drive 24p bravo 1 prop.
Motor is a 468 comp cam pro roller rockers 10qts oil pan holley carb dart iorn eagle heads gil/harden manifolds and risers pro billet msd dist. and soft touch rev limiter valve covers a bit rough, i will pull them and powder coat if wanted to color of choice. Ran the boat right around 70 never dyno'd but guestimate of 475 or so. Couple was also new with 50 hours. Steel trailer load rite with title brake inop but set up for it. has alloy wheels new tires bearing and seals just done.
Motor is a 468 comp cam pro roller rockers 10qts oil pan holley carb dart iorn eagle heads gil/harden manifolds and risers pro billet msd dist. and soft touch rev limiter valve covers a bit rough, i will pull them and powder coat if wanted to color of choice. Ran the boat right around 70 never dyno'd but guestimate of 475 or so. Couple was also new with 50 hours. Steel trailer load rite with title brake inop but set up for it. has alloy wheels new tires bearing and seals just done.
Last edited by Sick Stinger; 01-13-2013 at 02:33 PM.
01-13-2013 | 02:31 PM
#2
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
I haver a picture of a differant throttle shifter set up in the prev. post, those can be offered with the boat to replace the quicksilver stock 1 piece shifter. I have a rocker switch i will thrown in with it for drive trim. Boat has reupostered interior with exception of the sunpad. Alpine radio with remote cd and a set of 6x9 speaker in rear seat bennet trim tabs. Boat can be bought less power on trailer or just hull interior with no drive/ transome assembly and or with with out trailer. Has 3 monster gauges pro comp marine autometer speedo tach and water temp other gauges stock. can get any more pics you need or want
Thanks
Mike
Thanks
Mike
01-14-2013 | 10:17 AM
#10
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Boat and trailer 3000
With gimbal 3500
With drive 4000, ill throw the prop in and shifters leave trim pump and rewire and light the trailel. They work fine but good to have new stuff
Gimbal alone 800
Drive 800
Motor complete bravo drop in includes exhaust 4500 with powder valve covers of choice, less dist.
With full ignition 4700
MSD blue box, soft touch rev, and pro billet 350
With gimbal 3500
With drive 4000, ill throw the prop in and shifters leave trim pump and rewire and light the trailel. They work fine but good to have new stuff
Gimbal alone 800
Drive 800
Motor complete bravo drop in includes exhaust 4500 with powder valve covers of choice, less dist.
With full ignition 4700
MSD blue box, soft touch rev, and pro billet 350
Last edited by Sick Stinger; 01-14-2013 at 11:17 AM.
