|
Originally Posted by joew.
(Post 2085165)
ebay# 230112309656
|
Originally Posted by tomtbone1993
(Post 2085136)
Blower hose and roller rockers:bunny:
|
eddie marine
|
Originally Posted by jeff1000man
(Post 2085174)
Do you still have those studs you bought? I think mine came with studs but it wouldn't hurt to still have them just in case. Did you get the Merlin head bolts? You will need 8. Also you need to make sure your new ARP head bolts come with those 4 slightly shorter bolts or you will need to put double washers on those 4 bolts. There is not enogh extra thread on those bolts to get them torqued right. You will have 8 extra washers in the set because the Merlin bolts don't use washers.
|
Originally Posted by tomtbone1993
(Post 2085178)
still have studs & purchased Merlin bolts:bunny:
Should have everything you need. Did you order your rocker arms? Here the part number for the good stufff at JEGS. 270-13750-16 |
Tuesday should be the day:bunny:
|
Originally Posted by tomtbone1993
(Post 2085184)
Tuesday should be the day:bunny:
|
Originally Posted by jeff1000man
(Post 2085187)
Good luck
|
Originally Posted by joew.
(Post 2085189)
what is your goal datejeff
Dyno scheduled for saturday 14th. have 1 week after that to install and rig. Test run weekend after and adjust week berore TF200. Pie in the sky but doable. |
3 Attachment(s)
One getting close and one ready to go. I am doing paperwork for my job right now and will commence activity in a coulple of hours.
|
| All times are GMT -5. The time now is 05:27 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.