sweet!! Aluminum?

I wish my new carb would get here:(

nope cast iron to match the other 2 mills:bunny:

Do you have everything else you need???

Blower hose and roller rockers:bunny:

blower hose is at inland waitin on ya

Blower hose? just open your hatch:drink:

That works great until you get a unknown leak and die:D

Who Should I Order My Drive Shower From?

ebay# 230112309656

I SAW THAT ONE BUT FIGURED AFTER THE BIDDING WAR AND SHIPPING I COULD BUY IT FROM THE MANU.

Do you still have those studs you bought? I think mine came with studs but it wouldn't hurt to still have them just in case. Did you get the Merlin head bolts? You will need 8. Also you need to make sure your new ARP head bolts come with those 4 slightly shorter bolts or you will need to put double washers on those 4 bolts. There is not enogh extra thread on those bolts to get them torqued right. You will have 8 extra washers in the set because the Merlin bolts don't use washers.

eddie marine

still have studs & purchased Merlin bolts:bunny:

Should have everything you need. Did you order your rocker arms? Here the part number for the good stufff at JEGS. 270-13750-16

Tuesday should be the day:bunny:

Good luck

what is your goal datejeff

Dyno scheduled for saturday 14th. have 1 week after that to install and rig. Test run weekend after and adjust week berore TF200.

Pie in the sky but doable.

One getting close and one ready to go. I am doing paperwork for my job right now and will commence activity in a coulple of hours.

the new hampsters look good....what size are they?

582CI

ok.....what HP?:bunny:

Looks good:D

I am not really sure what these will make the way I am setting them up. They will be really under their potential because I am only using 800 carbs and small heads.

David thinks 800 at 6500. I don't plan on them ever getting revved that high. I am thinking more like 650 -700 at 4500-5000. More than enough to tear up my drives. I built them to cruise really strong at 3000-3500 in the boat and then if I ever get a boat that can handle more power, I can turn them up.

Guys have made from 900+ with this set up by turning them up.

As an added note. Boat probably still won't break 79.

that sucks:bunny:

Must be a typo, 59.:evilb: :eek: :D

You have to give me more creit than that. I am at 69 now. 10k = $1000 per 1MPH = 10 more MPH = 79 mph.

just f-in wit ya:p

Fu( k it Dude, Lets go bowling.

Masters coverage starts at 2:30 Central for those of you with TV in the office.

Look out for David Toms. Tiger not out of it yet.

T1 Brett Wetterich 3:00 -2 69 73 142
T1 Tim Clark 3:00 -2 71 71 142
3 Vaughn Taylor 2:50 -1 71 72 143
T4 Justin Rose 2:30 E 69 75 144
T4 Zach Johnson 2:40 E 71 73 144
T4 Jerry Kelly 2:50 E 75 69 144
T4 Vijay Singh 2:40 E 73 71 144
T8 Geoff Ogilvy 2:00 +1 75 70 145
T8 Bradley Dredge 2:10 +1 75 70 145
T8 Lucas Glover 2:20 +1 74 71 145
T8 David Howell 2:30 +1 70 75 145
T8 Padraig Harrington 2:20 +1 77 68 145
T8 Stuart Appleby 2:10 +1 75 70 145
14 Jim Furyk 2:00 +2 75 71 146
T15 David Toms -1 3 +3 70 78 148
T15 Dean Wilson E 2 +3 75 72 147
T15 Tiger Woods E 1 +3 73 74 147

I don't think that is how you calculate speed in a boat:bunny:

outback tonight????:cool:

know thats what I am talking about....who is in for tonight?

If it was Tbone could go mach 9:D

With triples it is 2MPH per $1000

The "DUDE" is in the house.

Outback then bowling:bunny: :bunny:

What Bat time?