Offshoreonly.com - The B.S. Thread

I think he is trying to mesh up the old next to the new to see the height difference. Could be wrong though. Except one is on a nice rolling stand and the other on a old crate. I hope they're the same height from top of block to top of block.

They aren't but I measured and they are really close. THe problem is that I can't tell exactly what the angle of the rubber hose was????

There is not really a lot of room under the swim platform to move around. They are either gonna work or they ain't. I am cutting the holes tomorrow and cross my fingers.

I should have about 3/8" margin of error all the way around. KC (the guy I got them from) said that on his boat they were a little lower than stock, but who knows if Velocity and Nortech used the same exhaust template when they cut the original holes??

tomtbone1993

08-30-2010 11:07 PM

Quote:

Originally Posted by jeff1000man (Post 3195713)

Are the Stellings headers and tails set up for standard bravo?

jeff1000man

08-30-2010 11:09 PM

1 Attachment(s)

You gotta know that just as soon as I start making progress, It looks like we might have to saddle up and go to work. This could get ugly. :party-smiley-004:

jeff1000man

08-30-2010 11:11 PM

Quote:

Originally Posted by tomtbone1993 (Post 3195717)

Are the Stellings headers and tails set up for standard bravo?

These are. KC spent a bunch of money having them made that way. He said they missed a little low though when they came back from Stelling. I hope they did, because, otherwise I will have to cut fiberglass out of the bottom of the swim platform.

tomtbone1993

08-30-2010 11:19 PM

Quote:

Originally Posted by jeff1000man (Post 3195718)

You gotta know that just as soon as I start making progress, It looks like we might have to saddle up and go to work. This could get ugly. :party-smiley-004:

work just another four letter word....

tomtbone1993

08-30-2010 11:31 PM

[YOUTUBE]http://www.youtube.com/watch?v=vyN8V...eature=related[/YOUTUBE]

jeff1000man

08-30-2010 11:37 PM

Quote:

Originally Posted by tomtbone1993 (Post 3195728)

work just another four letter word....

A YOB ain't nothin but work.

joew.

08-31-2010 08:47 AM

Quote:

Originally Posted by tomtbone1993 (Post 3195692)

JoeW, saw the pics saturday night after the Destin run...I quote him...."just start calling me Iceman"

Attached is the photo

Below is a video for his refrence:)

http://www.youtube.com/watch?v=fNUHc-HAzo8

Correction, I said "fat ice man"

BY U BOY

08-31-2010 10:55 AM

2 Attachment(s)

Brody will be ready to put some throttles in his hand soon:coolcowboy:

jeff1000man

08-31-2010 10:56 AM

Quote:

Originally Posted by BY U BOY (Post 3195997)

Brody will be ready to put some throttles in his hand soon:coolcowboy:

Who's his daddy? He is all ready bigger than you. :evilb::evilb::lolhit:

All times are GMT -5. The time now is 09:06 PM.