Converting to Electric/Hydraulic from Surge
04-07-2007 | 06:18 PM
#11
Registered
Joined: Oct 2000
Posts: 1,238
Likes: 0
bowtie
When I wanted to convert mine...the trailer was still very new. I called the trailer manufacture and they sold me what they had to convert. The tongue assembly (to rid the trailer of the actuator) and the BrakeRite assembly, the metal bracket for the BrakerRite to mount to and the battery box with battery along with the wire harness.
Now the friend of mine bought the type (and I really can't remember) but I think it butted right against the mater cylinder. I don't know what he did with this surge actuator. I will ask him....
Hope this helps alittle
JB
When I wanted to convert mine...the trailer was still very new. I called the trailer manufacture and they sold me what they had to convert. The tongue assembly (to rid the trailer of the actuator) and the BrakeRite assembly, the metal bracket for the BrakerRite to mount to and the battery box with battery along with the wire harness.
Now the friend of mine bought the type (and I really can't remember) but I think it butted right against the mater cylinder. I don't know what he did with this surge actuator. I will ask him....
Hope this helps alittle
JB
04-07-2007 | 07:40 PM
#12
Thread Starter
Emerald Coast of Florida
Joined: May 2004
Posts: 623
Likes: 0
From: Navarre FL
I'm not worried about it banging, the master cyclinder is shot on it.
04-08-2007 | 05:23 AM
#13
Platinum Member
Joined: Nov 2002
Posts: 2,399
Likes: 1
From: LONG ISLAND/LAKE MURRAY
Thread
Thread Starter
Forum
Replies
Last Post
sleek1
Trucks, Trailers and Transportation
23
02-25-2008 03:45 PM
KN
Trucks, Trailers and Transportation
6
04-21-2007 09:59 AM
berns29scarab
General Boating Discussion
27
10-30-2006 01:03 PM
