green lightning

Sorry I can't get any pictures to up load but if you click on the link you can see a picture of the install

shunter2005

I like it. Hope to get mine installed in the next few weeks.

F-2 Speedy

iTrader: (6)

Is the solenoid part of the break away system ?

green lightning

No the back up solenoid is a extra add on , the break away system consists of the trigger switch and the battery to keep the pump running till the trailer stops moving

offshoredrillin

just make sure the batteries for the break away unit are charged and pull the emergency pin and the motor will kick on then bleed brakes, furthest wheel first.

F-2 Speedy

iTrader: (6)

my controller is trash, I can stop the fluid flow by putting my finger over the line, you cant do that if its putting out 1600 psi...........so I ordered this one, sealed unit unlike my current one.

DEXTER Electric / Hydraulic Disc Brake Actuator #K71-651-00 | eBay

shunter2005

Just curious, what brand is your current actuator?

F-2 Speedy

iTrader: (6)

Titan brakerite, its not a sealed unit and has an exposed printed circuit board under the cover.

Titan BrakeRite Rite EHB Electric Hydraulic Brake Actuator Trailer Disc 1500 PSI | eBay

shunter2005

One reason why I went with Hydrastar. Main reason to go with Hydrastar for me was the plug and play aspect. When I am able to get my coupler welded and my little wiring box built (to hide everything but the actuator) in the next few weeks, it will be nice to just plug everything in and go. No hard wiring and no worries about butt connectors and heat shrink tubing.

F-2 Speedy

iTrader: (6)

does the break away switch ( switch ground ) or battery ? plugged in the circuit is open, then pull it and closes and completes the circuit.