|
Originally Posted by 1HYPER1
(Post 2596430)
Hey VV,I am ready for ya.I will be heading down the bay this weekend,man do I need a boat ride.
Boat looks good Bill, like the 3D shadow effect on the new name. :D |
Thong baby
How you been? |
Engines arrived at Derebery Performance, they look killer, should dyno next week and will have a video of the dyno runs for you guys to see. I talked to someone else that did pretty much the same thing with Super Cat engines that we did but had a little less compression ratio. 9:1 where we have 9.8:1. He dynoed 680 HP with manifolds. Maybe we will see 700 HP with stellings, at least that's the number we shot for.
|
3 Attachment(s)
Went by Derebery's today to deliver some parts and took these pic of Leons 5000 HP twin turbo engines. Going in "Beyond Reason"
See my big hand next to the turbo, they are huge! |
3 Attachment(s)
More
|
3 Attachment(s)
more
|
1 Attachment(s)
Leon and all my sh!t
|
Sweet pictures,I have seen Beyond Reason before and that man does everything first class,your package will be done properly and set up perfect.Congrats.:ernaehrung004:
|
3 Attachment(s)
Originally Posted by 1HYPER1
(Post 2606196)
Sweet pictures,I have seen Beyond Reason before and that man does everything first class,your package will be done properly and set up perfect.Congrats.:ernaehrung004:
|
3 Attachment(s)
Leon sayed he has driven some fast Velocity's and insisted in dialing it in for me. Must be something we all don't know about, that twilight "V" zone. He did mention you just thought she was a drivers boat before, she'll be a drivers boat when we get her done."
Here is a short video of Leon and 160MPH http://www.dereberyperformancemarine...edia/Movie.wmv |
Nice pics VV!! Some serious hardware floating around there!
|
Originally Posted by DKerns
(Post 2606243)
Nice pics VV!! Some serious hardware floating around there!
|
OK come on we need more pix and an update.
|
Update,1300 hp and broken parts,10,000 and did not tell wife yet,any suggestions cause she is gonna be pisseed.:eek:
|
Originally Posted by 1HYPER1
(Post 2612372)
Update,1300 hp and broken parts,10,000 and did not tell wife yet,any suggestions cause she is gonna be pisseed.:eek:
Not yours Bill?????:confused: |
Originally Posted by 1HYPER1
(Post 2612372)
Update,1300 hp and broken parts,10,000 and did not tell wife yet,any suggestions cause she is gonna be pisseed.:eek:
|
Originally Posted by Thong Fellow
(Post 2612054)
OK come on we need more pix and an update.
|
Originally Posted by DKerns
(Post 2612381)
Not yours Bill?????:confused:
|
Originally Posted by 1HYPER1
(Post 2612543)
Oh yea,me but I bought a new drive and just did not tell her yet.I think I am going car shopping and get her another new X5 BMW,that might help.I am going to install the drive and enjoy the 4th on the Bay,see everyone out there this weekend.
http://www.youtube.com/watch?v=h0utBfPhtjg |
:food-smiley-007:All my parts are in, IMCO extension boxes arrived today, looked like UPS rolled them all the way from Califorina. I had to send them out to get blasted and powder coated.
If you see anything I missed please speak up. First post on this thread was 04-28-2008 thru 7-16-08. 79 days so far, shipping/rebuilding engines/gathering parts. It takes a lot more planning and time than I realized. Thanks guys! Updated Parts/cost List: 2 - Mercury Supercat race engines $29,000.00 2 - Weldon 1000 HP Fuel pumps $1,400.00 2 – Regulators w/ by-pass Areomotive $500.00 2 - Oil coolers & brackets $500.00 2 - Keith E. Oil pre-lubers $1,400.00 2 - Hardin Marine water separators $440.00 2 - MSD Marine distributors $780.00 2 - MSD high vibration coils $100.00 2 - MDS coil brackets $10.00 2 - MSD sets rpm chips $132.00 2 - MSD insulated plug wires $200.00 2 - Stellings headers $13,000.00 2 - Stellings tailpipes $3,000.00 2 - Air activated switchable mufflers $2,400.00 2 – Hour meter Gauges Livorsi $100.00 2 - Xtreme Billet Aluminum Engine Mounts Rear Side By Side Mount $600.00 2 - Xtreme Billet Aluminum Engine Mounts Front Side By Side Mount $880.00 2 - Billet Aluminum Xtreme MSD 6M-2, Rev Limter & Coil Bracket $270.00 2 - Billet Aluminum Chevy Distributor Hold Down Clamp $80.00 2 - Throttle Bracket King Demon Carburetors $95.00 2 – Wiring harness $278.00 2 - Mercury XR race drives W/ 1" shorties $13,000.00 2 - 15.25 X 34P Mercury Marine props $1,500.00 2 - IMCO 12" Extension boxes $8,000.00 1 - IMCO Tie bars Lower $379.00 2 – IMCO HD gimbal rings and helmets $2,700.00 2 - K-Plane 380 plates $1,800.00 2 - K-plane pumps $500.00 2 - Trim pumps $500.00 4 - Billet 42oz. reserve fluid reservoirs $800.00 2 - Rule 2000 bilge pump $310.00 2 - Dual billet trim reservoirs for pumps Dana Marine $900.00 3 - Billet battery boxes Dana Marine $400.00 2 – XR Drive actuators $548.00 2 – XR drive locks $60.00 2 – Prop Locks $72.00 1 - Piratecom 5 person intercom system W/extreme headsets $2000.00 1 - VHF Radio $585.00 1 - VHF Remote microphone $160.00 1 - VHF antenna $100.00 1 - Ratchet mount $25.00 1 - VHF radio flush mount $25.00 1 - Go Pro video camera $170.00 PARTS= $89,199.00 TAX = $7,581.00 SHIPPING= $3,300.00 TOTAL= $100,080.00 - OLD PARTS SOLD=$14,000.00 $86,080.00 TOTAL 1- Large box Depends. N/C furnished by RaggedEdge:ernaehrung004: UPDATED 7/16/08 |
Originally Posted by Velocity Vector
(Post 2618030)
If you see anything I missed please speak up.
1- Large box Depends. :eek: |
I know what you mean about planning. Its all the little things you take for granted like head gaskets. My build has been stalled almost two weeks due to non stock on Felpro steel shimmed head gaskets that I need for my blower engines. My interior guy still hasn't finished my back seat. I am glad I kept the Formula untill the Velocity is done.
|
WOW!... :eek: Thats a serious parts list!! can't wait to find out how she's gonna run
|
Originally Posted by Velocity Vector
(Post 2618030)
:food-smiley-007:All my parts are in, IMCO extension boxes arrived today, looked like UPS rolled them all the way from Califorina. I had to send them out to get blasted and powder coated.
If you see anything I missed please speak up. First post on this thread was 04-28-2008 thru 7-9-08. 72 days so far, shipping/rebuilding engines/gathering parts. It takes a lot more planning and time than I realized. Thanks guys! Updated Parts/cost List: 2 - Mercury Supercat race engines $29,000.00 2 - Weldon 1000 HP Fuel pumps $1,400.00 2 – Regulators w/ by-pass Areomotive $500.00 2 - Oil coolers & brackets $500.00 2 - Keith E. Oil pre-lubers $1,400.00 2 - Hardin Marine water separators $440.00 2 - MSD Marine distributors $780.00 2 - MSD high vibration coils $100.00 2 - MDS coil brackets $10.00 2 - MSD sets rpm chips $132.00 2 - MSD insulated plug wires $200.00 2 - Stellings headers $13,000.00 2 - Stellings tailpipes $3,000.00 2 - Air activated switchable mufflers $2,400.00 2 - Mercury XR race drives W/ 1" shorties $13,000.00 2 - 15.25 X 34P Mercury Marine props $1,500.00 2 - IMCO 12" Extension boxes $8,000.00 1 - IMCO Tie bars Lower $379.00 2 - IMCO HD Gimbal rings & helmets $2,700.00 2 - K-Plane 380 plates $1,800.00 2 - K-plane pumps $500.00 2 - Trim pumps $500.00 4 - Billet 42oz. reserve fluid reservoirs $800.00 2 - Rule 2000 bilge pump $310.00 2 - Dual billet trim reservoirs for pumps Dana Marine $900.00 3 - Billet battery boxes Dana Marine $400.00 1 - Piratecom 5 person intercom system W/extreme headsets $2000.00 1 - VHF Radio $585.00 1 - VHF Remote microphone $160.00 1 - VHF antenna $100.00 1 - Ratchet mount $25.00 1 - VHF radio flush mount $25.00 1 - Go Pro video camera $170.00 $86,716.00 Tax: $7,370.00 Shipping: $3150.00 Total: $97,236.00 - Parts sold: $14,000.00 Parts = $83,236.00:food-smiley-007: 1- Large box Depends. N/C furnished by RaggedEdge:ernaehrung004: :eek::eek:: DAYUM,and I thought I was bad. |
Holy SSSSS!!!
I'll tell you if that was my list it would have to include: 1 - Divorce Attorney 2 - Half of everything I own. OH.....How much is Dberry charging you to put the puzzle together? Hope that didn't salt the wound |
1 Attachment(s)
I let the girl that trims toenails at the dock see a pictire of your boat. She thinks your hot and wants to swap spit. I gave her your # cause your boat is gonna be faster than mine. What are friends for? Here is her picture, be gentle with her she packs a gun(357) and gets what she wants, good luck, your good buddy, Andy...
|
1 Attachment(s)
Originally Posted by Andy
(Post 2619323)
I let the girl that trims toenails at the dock see a pictire of your boat. She thinks your hot and wants to swap spit. I gave her your # cause your boat is gonna be faster than mine. What are friends for? Here is her picture, be gentle with her she packs a gun(357) and gets what she wants, good luck, your good buddy, Andy...
|
any updates vec?
|
Originally Posted by 007joe
(Post 2632651)
any updates vec?
|
Hey Velocity Vector,
What happend to the tractor headers? Do you still have them? Might need a set. Thats a big list of nice parts there man!!! Thanks Mange |
Originally Posted by Mange
(Post 2642683)
Hey Velocity Vector,
What happend to the tractor headers? Do you still have them? Might need a set. Thats a big list of nice parts there man!!! Thanks Mange http://www.offshoreonlyclassifieds.c...o24087-en.html |
That's one impressive list of parts you got there!!!:ernaehrung004:
It's refreshing to see someone spending big on their hobby! :drink: You 'da Man!!! Kurt |
Any updates?
|
Last I heard they were going to dyno my engines the first of this week, but have not heard anything yet. Still pretty busy this time of year so I guess I'm at their mercy.
|
Originally Posted by Velocity Vector
(Post 2642739)
|
Originally Posted by 1HYPER1
(Post 2654050)
Hey Hey Hey there,it is not my fault,I just happen to be the retard that does not know when to say when,but it is fun.VV hows the project coming along I have some more instore for ya.:ernaehrung004:
|
Called Leon today and he told me they were going to get my shi! started first of next week. X fingers
|
I'm going to sweeten the thread a little. Tell a friend, Winner gets a $100.00! :ernaehrung004: :food-smiley-007:
Look at the parts listed below: ??? POST>>How much is it going to cost for just the labor turn Key??? Taken out the old and putting in the new :eek: I want you guy's to take an edcuated guess on how much the labor will end up costing on the project, all I can say is it is $95.00 per hr. :grinser010: To make it fair I'm staying out. When I get the final bill I will post the winner. Good Luck hope you win! One guess and make it a good'en :rolleyes: 3 Rules: 1. If you go over the total your guess doesn't count! 2. If for some reason there is a tie the earler post will win. 3. Once your $$$ guess is posted you can not edit it. VV 2 - Mercury Supercat race engines $29,000.00 2 - Weldon 1000 HP Fuel pumps $1,400.00 2 – Regulators w/ by-pass Areomotive $500.00 2 - Oil coolers & brackets $500.00 2 - Keith E. Oil pre-lubers $1,400.00 2 - Hardin Marine water separators $440.00 2 - MSD Marine distributors $780.00 2 - MSD high vibration coils $100.00 2 - MDS coil brackets $10.00 2 - MSD sets rpm chips $132.00 2 - MSD insulated plug wires $200.00 2 - Stellings headers $13,000.00 2 - Stellings tailpipes $3,000.00 2 - Air activated switchable mufflers $2,400.00 2 – Hour meter Gauges Livorsi $100.00 2 - Xtreme Billet Aluminum Engine Mounts Rear Side By Side Mount $600.00 2 - Xtreme Billet Aluminum Engine Mounts Front Side By Side Mount $880.00 2 - Billet Aluminum Xtreme MSD 6M-2, Rev Limter & Coil Bracket $270.00 2 - Billet Aluminum Chevy Distributor Hold Down Clamp $80.00 2 - Throttle Bracket King Demon Carburetors $95.00 2 – Wiring harness $278.00 2 - Mercury XR race drives W/ 1" shorties $13,000.00 2 - 15.25 X 34P Mercury Marine props $1,500.00 2 - IMCO 12" Extension boxes $8,000.00 1 - IMCO Tie bars Lower $379.00 2 – IMCO HD gimbal rings and helmets $2,700.00 2 - K-Plane 380 plates $1,800.00 2 - K-plane pumps $500.00 2 - Trim pumps $500.00 4 - Billet 42oz. reserve fluid reservoirs $800.00 2 - Rule 2000 bilge pump $310.00 2 - Dual billet trim reservoirs for pumps Dana Marine $900.00 3 - Billet battery boxes Dana Marine $400.00 2 – XR Drive actuators $548.00 2 – XR drive locks $60.00 2 – Prop Locks $72.00 1 - Piratecom 5 person intercom system W/extreme headsets $2000.00 1 - VHF Radio $585.00 1 - VHF Remote microphone $160.00 1 - VHF antenna $100.00 1 - Ratchet mount $25.00 1 - VHF radio flush mount $25.00 1 - Go Pro video camera $170.00 |
My guess 63k ?
|
I have know clue n this matter an d its early and im off to a poker run so this isnt educated or even thought threw...... 3K
Mike |
| All times are GMT -5. The time now is 08:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.