I know I know your fond of red white....We'll see.

Got a couple Skater seats today, we will use them up front and the white ones in the back.

That RED and WHITE is going to look AWESOME VV...........

Donzi Brother hooked me up today on these three 2 stage water pumps. never know when you might need a spare!

Picked up few items today.

2- Eddie Marine polished Billet Vents. 17 3/4" X 2 1/2" for the side or back of race hatch

4- Eddie Marine Blue anodized Billet Vents 17" X 3" for the front of race hatch

2- Eddie Marine yellow anodized steps 13 3/4" X 3" For center step

2- Eddie Marine copper anodized grab handles 8 3/4" Where ever

1- Spargi Silver Steering Wheel It's a 13.8" diameter 3 Spoke

As you can see we will have a rainbow of colors, but we ain't gay! Also picked up these footrest for the passenger seats so we're thinking the 2 back seats need to go on each side of the cockpit instead of beside the steps in the middle so the footrest will be on each side of the cockpit and not honked out in the middle of the cockpit as shown in the last diagram design.

Donzi brother hooked me up again not only with the KE 2 stage pumps, but also an assortment of 12AN - 16AN Braided lines. Thanks!

I have the same pipes as the one pictured. I haven't seen another set in years. Really loud.

Those aren't my engines just a reference to mounting the water pumps but I bet they really sound wicked. Did you notice the twin turbos sitting on the back of them?



Picked up a Garmin 740S today I stay lost without a GPS. We will dash mount this somewhere.

RAPTOR1 from the Velocity Family hooked old VV up today with a brand new Machine Marine tilt Steering unit. Thanks Charley!

And I found a 230CC Helm Valve

Hint ---- when you buy a set of SSM #6's make sure they have the tie bar saddles with them. New they are over 2K each! Ouchy. We found these used but still pricey.