Need Opinions......
#41
Thread Starter
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
And YES, the floor is due for a good scrubbing before the back seat goes in. 

Well, finally I was able to get a few parts picked up from the upholstery shop. He is still not done............. But the work he has done is very nice.
The weather has sucked anyway so it isn't like the upholstry is holding me up. I will have the other side panel and back seat installed by tomorrow.
I added a second set of Kicker 6.5s to the Front of each panel and eliminated them from under the rear seat. Obviously, as can be seen in the
picture I have some wiring still to do. I looks worse than it is. Just have to connect the speaker wires and the LED wires.

The weather has sucked anyway so it isn't like the upholstry is holding me up. I will have the other side panel and back seat installed by tomorrow.
I added a second set of Kicker 6.5s to the Front of each panel and eliminated them from under the rear seat. Obviously, as can be seen in the
picture I have some wiring still to do. I looks worse than it is. Just have to connect the speaker wires and the LED wires.

#42
Registered

Joined: Apr 2006
Posts: 977
Likes: 25
From: Palm Harbor, FL
I know this is taking longer than you wanted but wow it's going to turn out great. I'm trying to come up with a plan to redo my interior and I like the idea of replacing the white with light gray; white is such a pita to keep clean and your combo looks sharp.
How bad were the side panels to remove? Do I need someone with long rubbery arms to help remove about 100 nuts & bolts?
Thanks,
Rick
How bad were the side panels to remove? Do I need someone with long rubbery arms to help remove about 100 nuts & bolts?
Thanks,
Rick
#46
Thread Starter
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
Ok, here are some better pics. Speakers installed and floor clean. Need to re-glue the seem @ the back, it has curled up as you can see in the pics. (it is concealed by the seat)..


Tomorrow the rear seat goes in! Then I wait for the powder coater and upholstry guy.......
Tomorrow the rear seat goes in! Then I wait for the powder coater and upholstry guy.......
#48
Thread Starter
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
Back seat is in as well as lower panels. Lower panels were white, I sanded them and hit them with a "spray-bomb" Aluminum color then a clear coat. They have the perfect amount of gloss without being to glossy.

More pics to follow.
More pics to follow.



