The lift you have the boat parked between is a forward with an Indian head on it

Ok so just spent money I don't have boost gauges senders fuel senders 20 LED lights speaks Am/FM radio E12 subs AMP all new hardware and list goes on......

All white stepped 36, or 37 -- one of my favorites! !

Cleaned the bilge tonight pre fit gps, radio, VHF and put battery boxes in. Should have all parts ordered by Friday. Looking for a Sunday motor install. Platform dropped off also cleats for powder coat. Chipping away at it rite now.

[ATTACH=CONFIG]521702[/ATTACH]Lights galore just came in, ordered the sea pump kits fiber washer spring licks for the bell housing side for motor install. Needed a res bottle for trim pump that's on the way also

Ok so the crest of the interior is out doing new flooring and sir panels. Glove box came in ordered another speedo for the pass side. I should have the speakers and boost gauges tomorrow.

Where did you find a glove box? whats it look like?

It's actually a full am fm radio encloser I'm using as a glove

Pulled the flooring up last night and drilled out cabin light holes. Ran wires to them and rewired one light on another switch. Pulled cockpit OE lights out mocked up new lights in side panels and drill for lights in engine bulk head. I'll try to get the engine room lighting done tonight and order new flooring. Thanks to Hess (Dave) for some insight on my abortion of an interior. 1 way or another I'll get it done.

[ATTACH=CONFIG]521979[/ATTACH][ATTACH=CONFIG]521980[/ATTACH][ATTACH=CONFIG]521981[/ATTACH]Slow night tonight just picked up the platform and cleats. Came out mint at the tube of 860. But anyhow they are in and that's about it. Shooting for trim tank engine exhaust block off plate batt boxes and engine room lights tomorrow. We shall see