yikes your powder coat guy isnt shy about the $$$$ next time you need stuff done let me have my guy do it
ill bet it would have been $300 for what you had done .. hell your here every week anyways and comin again thursday
gotta say its starting to take shape ..i prob should have kept it for my self

Want it back......

Boost gauges are in. Ran the sender hoses also last night. Took the trim cables out to get length on them. Threw bolted instrument panel, cabin switch panel, and controls. Ran the wires for the cabin floor lights started on the stereo install. Also threw bolted the steps to get on the deck, not sure why the hell you would only screw those in. Started on fuel lines also.

It kind of sounds like those steps were an after thought? I don't have anything on mine that's not thru bolted. Then again, I don't have the steps anyway but I'd like to add them. Do you have a pic?

Pic of what part frank? I'll grab what ever you want. Going to hit it hard tonight trying to get a motor in by next week at some point.

[ATTACH=CONFIG]522277[/ATTACH][ATTACH=CONFIG]522278[/ATTACH][ATTACH=CONFIG]522279[/ATTACH][ATTACH=CONFIG]522280[/ATTACH][ATTACH=CONFIG]522281[/ATTACH][ATTACH=CONFIG]522282[/ATTACH]Hack wired the cardio to check function of speakers head unit ect. Lights are all hooked up and in place. Vacuumed it just to clean up. Mounted and set up the amp.

[ATTACH=CONFIG]522287[/ATTACH]Frank is this the pic you wanted? Look to the left and right if the entrance, there is steps at staggered Hughes to get up a'top the bow

Does anyone have a fix for the cabin door l. It's tin aluminum and it's beat from the aluminum to the cover. I'm wondering what's the thineat starboard they make. Would this be suitable?

That's it. Thank you.

Mine is stainless steel amd the upholstery is glued to it. When I first bought the boat it was hard to open/close. I called Bobby and he told me to fix it by replacing the edges with car door trim and lube it up with vaseline. Worked like a charm.