|
yup runs well 85 with 600slooking to get some 750s if I can sell these
|
2 Attachment(s)
[ATTACH=CONFIG]531761[/ATTACH][ATTACH=CONFIG]531760[/ATTACH]Couple pics and Vids from last nights run
http://www.youtube.com/watch?v=q56AyG5eUzw http://www.youtube.com/watch?v=w7FlG7FSiX0 |
Originally Posted by Sick Stinger
(Post 4211399)
[ATTACH=CONFIG]531761[/ATTACH][ATTACH=CONFIG]531760[/ATTACH]Couple pics and Vids from last nights run
http://www.youtube.com/watch?v=q56AyG5eUzw http://www.youtube.com/watch?v=w7FlG7FSiX0 |
Never gets snotty in mt hope bay.... Nah never...
|
No issue here with bravos out of 8 hours ive changed the oil 3 times. Keep the oil fresh be smart about it they will last. Im not saying they wont break but they can last a good while if treated correct.
Great night |
In the summer of 2000 I looked at one of The Nutech 36 Apache in a warehouse in Miami . The boat had a very conservative red paint and Carb 500's. Price at the time was around $165K no hull warranty on hull.
Called Bobby who was working with the gentleman ( Eric ?) who later owned the 28 molds and could not get any details about the boat. At this time the two of them were operating under the Apache name. In 2002 did the spring Key West Poker Run with the Freedom 36 with red, white and blue paint. Bobby S was on board for the trip sown to Key West. What ever happened to the 36 with the forward facing steps? |
Not sure, I do know 1 went into a field and banged up pretty good. I'd like to know what happen to the staggered 575 SCI one
|
Originally Posted by Sick Stinger
(Post 4211399)
[ATTACH=CONFIG]531761[/ATTACH][ATTACH=CONFIG]531760[/ATTACH]Couple pics and Vids from last nights run
http://www.youtube.com/watch?v=q56AyG5eUzw http://www.youtube.com/watch?v=w7FlG7FSiX0 |
Nick put the vid together and got the pic all credit to him. I just put the boat in gear no need to hold the wheel
|
Originally Posted by Sick Stinger
(Post 4211428)
No issue here with bravos out of 8 hours ive changed the oil 3 times. Keep the oil fresh be smart about it they will last. Im not saying they wont break but they can last a good while if treated correct.
Great night |
Doesn't cost me a ton at all. From working on boats I buy it by the big drum and burn the oil in a waste heater do no biggie to me. I change all oils every 5 hours. Oil is whole sale cost so no problem for peace of mind
|
Looks like the boat is getting a couple 700+'s
|
Squared as deal on a set of 604 motors that Gerry , knot rite will be over seeing/building. Should be a real nice package when we are complete.
|
Originally Posted by Sick Stinger
(Post 4123791)
[ATTACH=CONFIG]523534[/ATTACH][ATTACH=CONFIG]523535[/ATTACH]Ok 2nd motor is in. Hooked up water inlet, PS pump and cooler. Bouts gauge and water pressure set up. Main ground and connect between both motor ground hooked up. Tomorrow will be blower throttle shifter set up sea pump and lower blower pulley fuel lines.
|
not sure came with the motors when i got them. Im sure there out there and if not pretty simple to built them. There is a space plate i had milled out behind them to allow enough room for the bolt head not to hit the head? i believe
|
| All times are GMT -5. The time now is 04:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.