290 MotorYacht owners
03-11-2010 | 03:38 PM
#52
Thread Starter
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Uh yeah! You gave me the heads up on where to buy some parts I was looking for. Now that I think about it, you cost me alot of money!
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
03-11-2010 | 04:26 PM
#53
Custom Interiors & More
Joined: Jun 2008
Posts: 1,742
Likes: 2
From: Bucyrus, OH.
03-15-2010 | 01:25 PM
#54
Registered
Joined: Aug 2009
Posts: 31
Likes: 0
hey Jerry thanks again i hope to get some work done this week on mine. I pulled all of the interior out when we got back and am going to try and get the drives on this week and dig further into the knock i was hearing. here is the link to the website for the laminates . http://restorationmarine.com check it out you guys might be interested in it.
03-15-2010 | 10:01 PM
#55
Thread Starter
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Great, post up some current pics when you get a chance. You might remove the spark plugs and rotate the motor over back and forth listening for the knocking. It won't be the gimble bearing, that doesn't turn w/o the drives installed. Did you run it long enough to get an oil pressure reading? That site makes it look easy. I'd have that stuff all over, except were it is supposed to be.
Don't forget to checkout www.rochfordsupply.com for all your material needs. We removed most all the screws holding the deck to the hull sides behind the rubrail today and dug out all the silicone. Going to fill the joint with 5200 tommorrow. Should make the boat solid as a rock. Feel sorry for the guy who has to work on this boat when I get rid of it.
Thanks again
Don't forget to checkout www.rochfordsupply.com for all your material needs. We removed most all the screws holding the deck to the hull sides behind the rubrail today and dug out all the silicone. Going to fill the joint with 5200 tommorrow. Should make the boat solid as a rock. Feel sorry for the guy who has to work on this boat when I get rid of it.
Thanks again
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
06-01-2010 | 08:39 PM
#58
Thread Starter
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Making headway I see.
Got mine all finished up Fri and hauled to the lake for the holiday. No leaks, so all must have been good.
Now just gotta sort thru all the old/extra parts and toss the junk, dump the rest.
Got mine all finished up Fri and hauled to the lake for the holiday. No leaks, so all must have been good.
Now just gotta sort thru all the old/extra parts and toss the junk, dump the rest.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 10:59 AM.
06-04-2010 | 03:53 PM
#59
Registered
Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
