Mistress repower #2 begins....
02-16-2016, 06:04 PM
#961
Charter Member#568
Charter Member
I have my old MK cams that I just swapped out. Maybe they will fit without additional changes? Your heads are bigger though, not sure if that would help or hurt, but they made good power in my application.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
Last edited by bck; 02-16-2016 at 06:30 PM.
02-16-2016, 06:12 PM
#962
Registered
A quick thought/idea. ... put a stopper behind the sticks to keep them from going to the dash where u seam to like to keep them all the time. Lol might get you through the summer.
02-16-2016, 06:49 PM
#963
Registered
I would park it and take a summer off if it is to that point in your life. It ain't going to hell sitting . Can't imagine having having all that money and time into some motors and running them on a wing and a prayer and know there is most likely going to be an inevitable failure.
What is the difference in the timing sets that they are not interchangeable with different cams
What is the difference in the timing sets that they are not interchangeable with different cams
Last edited by tommymonza; 02-16-2016 at 06:52 PM.
02-16-2016, 07:35 PM
#967
Registered
I will pass on the 200 dollars to save 4,000 + when chit brakes. Last time I broke stuff it ended up costing me 22k or there abouts not that I don't run it hard just not every sec out of no wake zones lol. Drives up sticks down is fun but can get you in trouble some times
02-16-2016, 07:45 PM
#968
Gold Member
Gold MemberThread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
I don't have any proof that they WILL FAIL that I have seen with my eyes... that being said, I will NOT take a season off at will, only forced and that has yet to happen if it breaks I will make it run one way or another, I will put stock engines in if I must but I will boat, I am not the guy that owns a boat and never uses it and stares at it... fuk that...
Look back at my many years on OSO and things I have gone through, if that don't show me being hard core then nothing can, I boat, I am a boater, I will ALWAYS boat... period.
Look back at my many years on OSO and things I have gone through, if that don't show me being hard core then nothing can, I boat, I am a boater, I will ALWAYS boat... period.
I would park it and take a summer off if it is to that point in your life. It ain't going to hell sitting . Can't imagine having having all that money and time into some motors and running them on a wing and a prayer and know there is most likely going to be an inevitable failure.
What is the difference in the timing sets that they are not interchangeable with different cams
What is the difference in the timing sets that they are not interchangeable with different cams
02-16-2016, 10:06 PM
#970
Registered
iTrader: (3)
Last edited by phragle; 02-16-2016 at 10:24 PM.
