Helm dash out


On to modifications


This is were the spider crack is due to tabing that came lose so the bulkhead that holds the dash was just hitting the side.


Bulk head that is used to mount the dash to. They only tab one side from the factory. And they only used one piece of glass. I ground it all clean and I’m going to tab in in with a few layer.

Finished the tow pig to !!!

Did some sanding

Does anyone have a wiring diagram for these Topgun’s. I am replacing both engim
harness all the way up I know that go to the junction box in the head just don’t know the colors and spaces

Pm me your email. I can send you what I have as far as diagrams go.

Eric.ancarrow ( atttt) Ferguson.com

[email protected] thanks so much !!!

Well I built it from the ground up. Started with a frame had it sandblasted powered coated them we painted it . I did all new suspension parts 3 inch lift air bags red head steering box bog Warner steering shaft. Used all Carly suspension parts all new brakes , all new factory lines literary replaced every bolt. Head studded engine big single turbo pac brake ext lol list goes on . Drove to South Carolina bought a 2005 ram 1500 with 47k on with a blown 4.7. Got it for super cheap. It was a slt Laramie so it was loaded. Interior was like new heated seats ect heck the paint was even perfect. Took my time swamped over all the diesel harness for dash and stuff. All new heater core ac parts ext. all silicone hoses I really just replaced everything lol. 2.5 commercial hitch as well. I actually sold my 2015 f350 cause the 6.7 was giving me problems I wanted to go back to a truck I could work on myself lol. I love how it can out pulls great and it’s paid for lol

Steering


Held my breath on this one





Replaced lines and rails and basically every moving part