Bay Point, our daughter has friends in there with a camper now.

Good times out there !!! Getting ready to shoot the bottom of boat today !

You are doing a fantastic job . I have one observation. I was always under the impression that one should not use fiberglass mat with epoxy resin . I was told that the styrene in the polyester resin would break down the binding agent that holds the mat together and the epoxy resin would not .
Was I mistaken or are you matt compatible with epoxy resin ? RG.

From the research I have done west system epoxy is compatible with mat. It has the highest bonding qualities so for the bottom of the boat it’s a great choice. The small fractures I’m fixing are so thing I totally could have left but when we’re going this far why not ? We’re paint the front portion of the bottom not the back running surface due to it being blue printed and I don’t want to paint over all that. Trailer is 100 percent done and came out great. Boat is completely wrapped in awlgrip 545 whip epoxy primer and bottom os being painted Sunday. Let it sit for a week then back on trailer !

Hours of prep

Put 16 blue live well lights to shine up on the hull

Welded all the holes Shut for all new round clear leds



2 coats awlgrip epoxy primer sanded and 3 coats awlcrap 2000 Snow White revisted she’s shinning bright

New lights

New wheels and 14 ply tires new bunks and carpet going on saturday

ever though about on the main rails putting an air fitting in, then pumping some air in before ya dunk to stop the water from getting in? i do that with my axle hubs from air tite.

Might make it float.

We all fresh water up hear so I figure It will be ok ✅

Some sea deck

3 coats awlcraft 2000

Bunks this weekend. Rest of boat has been blocked sanded and hand sanded for about 100 hours it’s getting loaded back up headed to paint booth Friday !next week !