BUy a Brother "P" touch to make your labels not to expensive and makes life easier to read.

I have a buddy who works in the machine shop at a Ford plant. They do remarkabe things with their spare time (which is all of their time). They removed the 6 dash panels from the cat and are in the process of duplicating with marked improvements. The Garmin 182C will be recessed into the dash and will rotate up to 90 degrees for running.

This includes professionally engraving all the switches and poistions. Most machine shops can easily replicate the panels.

Priceless.

Here's how much they had on our Tiger when Phil had the panel re-painted by Grafikworx. Mine is a 2000 so i bet yours should have the same slack in the wiring

Hope this helps.

GRS,
Check your PM.
It is not hard to do, take your time and label everything.
Good Luck