Originally Posted by ealesh33 (Post 4279452)

Yea I am a Chesapeake bay boater, I see your in PA, you boat on the Chesapeake too?

Originally Posted by ramos45 (Post 4279528)

Black Baja - do you have pics of the 3" blowre pulleys you have? I'm dynoing with the stock 3.5 upper and 7 lower. Depending on how much/(little) boost I have I may be in need of your pulleys.

Originally Posted by blue thunder (Post 4279552)

20 years on the chesapeake this year so yes, my stomping ground for sure. I keep my floating condo (carver) slipped at the mouth of the susquehanna river and run out of there. How about you?

Originally Posted by ealesh33 (Post 4279556)

I run out of the Bohemia, hacks point. My buddy knows you, said your Panther runs pretty good lol

Originally Posted by blue thunder (Post 4279558)

Ah, yes. We recently became friends on fb I believe. What are you running 177s in?

Originally Posted by blue thunder (Post 4279553)

I have small pulleys too ramos if you need some.

Originally Posted by ICDEDPPL (Post 4279545)

WE really screwed your thread up Ramos.. sorry about that buddy.

Originally Posted by ealesh33 (Post 4279314)

Another difference is I saw Mike dyno'd at 36 degrees timing where we did at 34 degrees. We dropped timing back to 33 so see if with the combustion chamber being more efficient it liked less timing better, it didn't the change was about 2-3hp going from 34 back to 33. I'm not sure if there is any gain or not going up, 34 could be the sweet spot but don't know for sure. Mike did you play with timing under that 36 degrees you used?